|
Re: question about building on Windows
Hi Dmitri,
Honestly, the more I deal with these issues (which seem to come up in a different form every time someone tries to build on windows), the more I think this step by step thing that we do
Hi Dmitri,
Honestly, the more I deal with these issues (which seem to come up in a different form every time someone tries to build on windows), the more I think this step by step thing that we do
|
By
Frank Quinn <fquinn.ni@...>
·
#1731
·
|
|
Re: question about building on Windows
I've fixed the error, no big deal, my intention here is to understand if a) I'm not following instructions properly or b) the instructions need to be updated.
You're the only person who can tell me if
I've fixed the error, no big deal, my intention here is to understand if a) I'm not following instructions properly or b) the instructions need to be updated.
You're the only person who can tell me if
|
By
Dmitri Fedorov <dfedorov.solace@...>
·
#1730
·
|
|
Re: question about building on Windows
*sigh* most recent response was from memory rather than anything else. When I get a chance to look I can verify. It reads like you could just comment out the duplicate definition though.
*sigh* most recent response was from memory rather than anything else. When I get a chance to look I can verify. It reads like you could just comment out the duplicate definition though.
|
By
Frank Quinn <fquinn.ni@...>
·
#1729
·
|
|
Re: question about building on Windows
Same error using the VS project file:
1> event.c
1>c:\program files (x86)\windows kits\10\include\10.0.10240.0\ucrt\time.h(39): error C2011: 'timespec': 'struct' type redefinition
1>
Same error using the VS project file:
1> event.c
1>c:\program files (x86)\windows kits\10\include\10.0.10240.0\ucrt\time.h(39): error C2011: 'timespec': 'struct' type redefinition
1>
|
By
Dmitri Fedorov <dfedorov.solace@...>
·
#1728
·
|
|
Re: question about building on Windows
Don't use nmake use the libevent 1.x project file instead. That will build libevent.lib
Don't use nmake use the libevent 1.x project file instead. That will build libevent.lib
|
By
Frank Quinn <fquinn.ni@...>
·
#1727
·
|
|
Re: question about building on Windows
Frank,
Now I'm puzzled by the other dependency: libevent.
The OpenMAMA Wiki page you referred to suggests to build 1.4.x as libevent_code.lib, but openmama\mama\c_cpp\src\c\bridge\avis\avis.vcxproj
Frank,
Now I'm puzzled by the other dependency: libevent.
The OpenMAMA Wiki page you referred to suggests to build 1.4.x as libevent_code.lib, but openmama\mama\c_cpp\src\c\bridge\avis\avis.vcxproj
|
By
Dmitri Fedorov <dfedorov.solace@...>
·
#1726
·
|
|
Re: question about building on Windows
Hi Dmitri,
It defaults to 32 bit but 64 bit should work fine when you add it as of OpenMAMA 2.3.3.
Cheers,
Frank
Hi Dmitri,
It defaults to 32 bit but 64 bit should work fine when you add it as of OpenMAMA 2.3.3.
Cheers,
Frank
|
By
Frank Quinn <fquinn.ni@...>
·
#1725
·
|
|
Re: question about building on Windows
This is 32-bit build reference, right?
64-bit AVIS build creates \platforms\windows\x64\$(Configuration)
Do you build OpenMAMA 64-bit on Windows or I'm the only one who's doing it and I shouldn't do
This is 32-bit build reference, right?
64-bit AVIS build creates \platforms\windows\x64\$(Configuration)
Do you build OpenMAMA 64-bit on Windows or I'm the only one who's doing it and I shouldn't do
|
By
Dmitri Fedorov <dfedorov.solace@...>
·
#1724
·
|
|
Re: question about building on Windows
Hi Dmitri,
You need the client library for C, and you need the tgz file inside (i.e. not just the DLLs / headers of the zip file)
http://downloads.sourceforge.net/avis/avis-client-1.2.4.tar.gz
Then
Hi Dmitri,
You need the client library for C, and you need the tgz file inside (i.e. not just the DLLs / headers of the zip file)
http://downloads.sourceforge.net/avis/avis-client-1.2.4.tar.gz
Then
|
By
Frank Quinn <fquinn.ni@...>
·
#1723
·
|
|
Re: question about building on Windows
This is the structure of packages I'm referring to, none of them has "platforms" directory.
Regards,
Dmitri Fedorov
Software Architect
Solace Systems, Inc.
Ottawa, ON Canada
Solace Systems accepts no
This is the structure of packages I'm referring to, none of them has "platforms" directory.
Regards,
Dmitri Fedorov
Software Architect
Solace Systems, Inc.
Ottawa, ON Canada
Solace Systems accepts no
|
By
Dmitri Fedorov <dfedorov.solace@...>
·
#1722
·
|
|
Code change(s) just landed on origin/next (Successful)
Some changes have just been added to the origin/next branch!
[Frank Quinn] PLAT-235: MAMDA: Using higher precision prices when creating
Some changes have just been added to the origin/next branch!
[Frank Quinn] PLAT-235: MAMDA: Using higher precision prices when creating
|
By
jenkins@...
·
#1720
·
|
|
Re: question about building on Windows
Sorry Frank for the typo, the AVIS source of course, not axis
Regards,
Dmitri Fedorov
Software Architect
Solace Systems, Inc.
Ottawa, ON Canada
Solace Systems accepts no liability for the content of
Sorry Frank for the typo, the AVIS source of course, not axis
Regards,
Dmitri Fedorov
Software Architect
Solace Systems, Inc.
Ottawa, ON Canada
Solace Systems accepts no liability for the content of
|
By
Dmitri Fedorov <dfedorov.solace@...>
·
#1721
·
|
|
Re: question about building on Windows
Yes, Frank, I get that, this is not what I'm asking, I'm asking where do I get the axis source that fits into this structure after compilation?
Here:
https://sourceforge.net/projects/avis/files/
I've
Yes, Frank, I get that, this is not what I'm asking, I'm asking where do I get the axis source that fits into this structure after compilation?
Here:
https://sourceforge.net/projects/avis/files/
I've
|
By
Dmitri Fedorov <dfedorov.solace@...>
·
#1719
·
|
|
Code change(s) just landed on origin/next (Successful)
Some changes have just been added to the origin/next branch!
No changes
Results for OpenMAMA Next Branch (Qpid Proton) CI run with latest changes:
CI Project Name: OpenMAMA Next Branch (Qpid
Some changes have just been added to the origin/next branch!
No changes
Results for OpenMAMA Next Branch (Qpid Proton) CI run with latest changes:
CI Project Name: OpenMAMA Next Branch (Qpid
|
By
jenkins@...
·
#1717
·
|
|
Re: question about building on Windows
Hi Dmitry,
You need to compile the tgz from source using the solution file in platforms/windows
Cheers,
Frank
Hi Dmitry,
You need to compile the tgz from source using the solution file in platforms/windows
Cheers,
Frank
|
By
Frank Quinn <f.quinn@...>
·
#1718
·
|
|
Re: question about building on Windows
Thanks Frank, now I'm stuck on Avis dependency.
avis.vcxproj refers to $(AVIS_HOME)\platforms\windows\Debug\avis.dll and $(AVIS_HOME)\platforms\windows\$(Configuration)
both AVIS Windows client and a
Thanks Frank, now I'm stuck on Avis dependency.
avis.vcxproj refers to $(AVIS_HOME)\platforms\windows\Debug\avis.dll and $(AVIS_HOME)\platforms\windows\$(Configuration)
both AVIS Windows client and a
|
By
Dmitri Fedorov <dfedorov.solace@...>
·
#1716
·
|
|
Re: OpenMAMA Developer List Commit Notifications
OK... so it looks like email is refusing to send to that particular mailing list. Please bear with me for a while, and ignore any email which details "No Changes".
Cheers,
Frank
OK... so it looks like email is refusing to send to that particular mailing list. Please bear with me for a while, and ignore any email which details "No Changes".
Cheers,
Frank
|
By
Frank Quinn <fquinn.ni@...>
·
#1715
·
|
|
Re: question about building on Windows
Hi Dmitri,
I wanted to do things like that but they kept changing them so I gave up (that's why we just point to their build method now). You'll find the latest list that I use in the travis CI
Hi Dmitri,
I wanted to do things like that but they kept changing them so I gave up (that's why we just point to their build method now). You'll find the latest list that I use in the travis CI
|
By
Frank Quinn <fquinn.ni@...>
·
#1714
·
|
|
Re: question about building on Windows
Thanks Frank,
Do you think OpenMAMA Wiki should list cmake macros that disable functionality OpenMAMA doesn't need?
If you have such list, please send it my way, I can validate
Thanks Frank,
Do you think OpenMAMA Wiki should list cmake macros that disable functionality OpenMAMA doesn't need?
If you have such list, please send it my way, I can validate
|
By
Dmitri Fedorov <dfedorov.solace@...>
·
#1713
·
|
|
OpenMAMA Developer List Commit Notifications
Hi Folks,
I'm about to turn on notification of commits landing on the next and master branches to this alias as discussed before the 2.4.0 release. The intent is to keep everyone informed of when
Hi Folks,
I'm about to turn on notification of commits landing on the next and master branches to this alias as discussed before the 2.4.0 release. The intent is to keep everyone informed of when
|
By
Frank Quinn <fquinn.ni@...>
·
#1712
·
|