OpenMAMA 2.3.1 Point Release


Damian Maguire <DMaguire@...>
 

Afternoon all,‧                                                                  
                                                                                    
Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

Firstly, the process we will be following:
  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

As always, if you have any questions let me know.

Thanks,

Damian   

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


Tom Doust
 

Hi Damian

 

Tick42 will download and build the RC when it is available and test it out with our RMDS bridge and QPID

 

Regards

 

Tom Doust

 

From: openmama-dev-bounces@... [mailto:openmama-dev-bounces@...] On Behalf Of Damian Maguire
Sent: 13 June 2014 4:57 PM
To: openmama-dev@...
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all,                                                                  

                                                                                    

Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

 

Firstly, the process we will be following:

  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

 

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

 

As always, if you have any questions let me know.

 

Thanks,

 

Damian   

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.



Damian Maguire <DMaguire@...>
 

Thanks Tom, that's great.

Cheers,

Damian
 

From: Tom Doust [mailto:tom.doust@...]
Sent: Monday, June 16, 2014 12:46 PM
To: Damian Maguire; openmama-dev@... <openmama-dev@...>
Subject: RE: OpenMAMA 2.3.1 Point Release
 

Hi Damian

 

Tick42 will download and build the RC when it is available and test it out with our RMDS bridge and QPID

 

Regards

 

Tom Doust

 

From: openmama-dev-bounces@... [mailto:openmama-dev-bounces@...] On Behalf Of Damian Maguire
Sent: 13 June 2014 4:57 PM
To: openmama-dev@...
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all,                                                                  

                                                                                    

Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

 

Firstly, the process we will be following:

  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

 

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

 

As always, if you have any questions let me know.

 

Thanks,

 

Damian   

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.



This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


Damian Maguire <DMaguire@...>
 

Afternoon all, 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

$ git checkout OpenMAMA-2.3.1

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

Cheers,

Damian

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all,‧                                                                  
                                                                                    
Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

Firstly, the process we will be following:
  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

As always, if you have any questions let me know.

Thanks,

Damian   

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


Damian Maguire <DMaguire@...>
 

Morning folks,

Just a quick update, the RC test RPMS and Windows build are available from the following links:


If anyone has a chance to download and test it would be great.

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:
  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache
We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

Cheers, 

Damian

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

$ git checkout OpenMAMA-2.3.1

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

Cheers,

Damian

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all,‧                                                                  
                                                                                    
Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

Firstly, the process we will be following:
  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

As always, if you have any questions let me know.

Thanks,

Damian   

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


Tom Doust
 

Hi Damian

 

I pulled from the git a couple of days ago and did a quick sanity check build of the bits we need to build bridges. I converted to VS2012 and did a rebuild of mamalistenc, which rebuilds enough to get the libs we require for bridge development.  Unlike previous versions I didn’t have to do anything to get it to build J

 

There’s still more warnings than I am happy with but we can discuss those later – many of these are specific to vs2010/2012.  Hopefully, I’ll find a bit of  time next week to build from the zipped version in your link

 

Tom

 

From: openmama-dev-bounces@... [mailto:openmama-dev-bounces@...] On Behalf Of Damian Maguire
Sent: 26 June 2014 9:54 AM
To: Damian Maguire; openmama-dev@...
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Morning folks,

 

Just a quick update, the RC test RPMS and Windows build are available from the following links:

 

 

If anyone has a chance to download and test it would be great.

 

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:

  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache

We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

 

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

 

Cheers, 

 

Damian

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

 

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all, 

 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

 

$ git checkout OpenMAMA-2.3.1

 

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

 

Cheers,

 

Damian

 

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all,                                                                  

                                                                                    

Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

 

Firstly, the process we will be following:

  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

 

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

 

As always, if you have any questions let me know.

 

Thanks,

 

Damian   

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.



This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.



Alpert, Reed <reed.alpert@...>
 

Hi,

 

The solace payload is not in this release (the bridge is):

MAMA_PAYLOAD_SOLACE     = '1',

 

This was in the next branch.

 

Thanks,

 

Reed.

 


Reed Alpert | Corporate & Investment Bank | Market Data Services | J.P. Morgan | 4 Metrotech Center, 23rd Floor, Brooklyn, NY 11245 | T: 718.242.5198  | M: 917.414.4613 | reed.alpert@...

 

Alternate Contact:  CIB PIM Trading Technology Solutions NA | CIB_PIM_Trading_Technology_Solutions_NA@...

 

From: openmama-dev-bounces@... [mailto:openmama-dev-bounces@...] On Behalf Of Damian Maguire
Sent: Thursday, June 26, 2014 4:54 AM
To: Damian Maguire; openmama-dev@...
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Morning folks,

 

Just a quick update, the RC test RPMS and Windows build are available from the following links:

 

 

If anyone has a chance to download and test it would be great.

 

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:

  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache

We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

 

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

 

Cheers, 

 

Damian

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

 

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all, 

 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

 

$ git checkout OpenMAMA-2.3.1

 

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

 

Cheers,

 

Damian

 

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all,                                                                  

                                                                                    

Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

 

Firstly, the process we will be following:

  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

 

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

 

As always, if you have any questions let me know.

 

Thanks,

 

Damian   

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.



This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


This communication is for informational purposes only. It is not intended as an offer or solicitation for the purchase or sale of any financial instrument or as an official confirmation of any transaction. All market prices, data and other information are not warranted as to completeness or accuracy and are subject to change without notice. Any comments or statements made herein do not necessarily reflect those of JPMorgan Chase & Co., its subsidiaries and affiliates. This transmission may contain information that is proprietary, privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as applicable, for any loss or damage arising in any way from its use. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. Please refer to http://www.jpmorgan.com/pages/disclosures for disclosures relating to European legal entities.


Damian Maguire <DMaguire@...>
 

Just to follow up here, we discussed this off list and Reed managed to track down the source of his issue.

Cheers, 

D

From: <Alpert>, Reed <reed.alpert@...>
Date: Friday, June 27, 2014 8:07 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: RE: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Hi,

 

The solace payload is not in this release (the bridge is):

MAMA_PAYLOAD_SOLACE     = '1',

 

This was in the next branch.

 

Thanks,

 

Reed.

 


Reed Alpert | Corporate & Investment Bank | Market Data Services | J.P. Morgan | 4 Metrotech Center, 23rd Floor, Brooklyn, NY 11245 | T: 718.242.5198  | M: 917.414.4613 | reed.alpert@...

 

Alternate Contact:  CIB PIM Trading Technology Solutions NA | CIB_PIM_Trading_Technology_Solutions_NA@...

 

From: openmama-dev-bounces@... [mailto:openmama-dev-bounces@...] On Behalf Of Damian Maguire
Sent: Thursday, June 26, 2014 4:54 AM
To: Damian Maguire; openmama-dev@...
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Morning folks,

 

Just a quick update, the RC test RPMS and Windows build are available from the following links:

 

 

If anyone has a chance to download and test it would be great.

 

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:

  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache

We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

 

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

 

Cheers, 

 

Damian

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

 

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all, 

 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

 

$ git checkout OpenMAMA-2.3.1

 

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

 

Cheers,

 

Damian

 

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all,                                                                  

                                                                                    

Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

 

Firstly, the process we will be following:

  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

 

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

 

As always, if you have any questions let me know.

 

Thanks,

 

Damian   

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.



This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


This communication is for informational purposes only. It is not intended as an offer or solicitation for the purchase or sale of any financial instrument or as an official confirmation of any transaction. All market prices, data and other information are not warranted as to completeness or accuracy and are subject to change without notice. Any comments or statements made herein do not necessarily reflect those of JPMorgan Chase & Co., its subsidiaries and affiliates. This transmission may contain information that is proprietary, privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as applicable, for any loss or damage arising in any way from its use. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. Please refer to http://www.jpmorgan.com/pages/disclosures for disclosures relating to European legal entities.


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


Damian Maguire <DMaguire@...>
 

Afternoon all, 

Following a couple of issues raised through testing last week, a number of small fixes have been added (primarily to Scons for Windows). As such I've decided to move to a new RC, and so have now tagged OpenMAMA-2.3.1-RC2. You should be able to pull it from the OpenMAMA git repo using the same instructions as before:

$ git checkout OpenMAMA-2.3.1

I'm currently rebuilding the Windows Zip and Linux RPM's, so will let everyone know when those become available.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Thursday, June 26, 2014 9:54 AM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Morning folks,

Just a quick update, the RC test RPMS and Windows build are available from the following links:


If anyone has a chance to download and test it would be great.

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:
  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache
We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

Cheers, 

Damian

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

$ git checkout OpenMAMA-2.3.1

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

Cheers,

Damian

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all,‧                                                                  
                                                                                    
Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

Firstly, the process we will be following:
  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

As always, if you have any questions let me know.

Thanks,

Damian   

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


Damian Maguire <DMaguire@...>
 

EPEL 6 RPMs and Windows dynamic build RC2 are now available to download at the following links:


Let me know if anyone sees any issues.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Monday, June 30, 2014 2:42 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

Following a couple of issues raised through testing last week, a number of small fixes have been added (primarily to Scons for Windows). As such I've decided to move to a new RC, and so have now tagged OpenMAMA-2.3.1-RC2. You should be able to pull it from the OpenMAMA git repo using the same instructions as before:

$ git checkout OpenMAMA-2.3.1

I'm currently rebuilding the Windows Zip and Linux RPM's, so will let everyone know when those become available.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Thursday, June 26, 2014 9:54 AM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Morning folks,

Just a quick update, the RC test RPMS and Windows build are available from the following links:


If anyone has a chance to download and test it would be great.

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:
  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache
We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

Cheers, 

Damian

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

$ git checkout OpenMAMA-2.3.1

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

Cheers,

Damian

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all,‧                                                                  
                                                                                    
Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

Firstly, the process we will be following:
  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

As always, if you have any questions let me know.

Thanks,

Damian   

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


Guy <guy.tal@...>
 

Hello Damian,

I tested the build of OpenMAMA on Visual Studio from the source provided below (RC2 in rpm file).
I found few issues and I have few solutions. For that I opened bug 119 in Bugzilla.
Things that I haven't checked at all are Java and C# projects.

Regards,
Guy

On 6/30/2014 7:27 PM, Damian Maguire wrote:
EPEL 6 RPMs and Windows dynamic build RC2 are now available to download at the following links:


Let me know if anyone sees any issues.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Monday, June 30, 2014 2:42 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

Following a couple of issues raised through testing last week, a number of small fixes have been added (primarily to Scons for Windows). As such I've decided to move to a new RC, and so have now tagged OpenMAMA-2.3.1-RC2. You should be able to pull it from the OpenMAMA git repo using the same instructions as before:

$ git checkout OpenMAMA-2.3.1

I'm currently rebuilding the Windows Zip and Linux RPM's, so will let everyone know when those become available.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Thursday, June 26, 2014 9:54 AM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Morning folks,

Just a quick update, the RC test RPMS and Windows build are available from the following links:


If anyone has a chance to download and test it would be great.

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:
  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache
We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

Cheers, 

Damian

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

$ git checkout OpenMAMA-2.3.1

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

Cheers,

Damian

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all,‧                                                                  
                                                                                    
Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

Firstly, the process we will be following:
  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

As always, if you have any questions let me know.

Thanks,

Damian   

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


_______________________________________________
Openmama-dev mailing list
Openmama-dev@...
https://lists.openmama.org/mailman/listinfo/openmama-dev


Damian Maguire <DMaguire@...>
 

Thanks for that Guy, looks good. I'll take a look through the comments on the BZ ticket, and we can follow up there.

Cheers, 

Damian

From: Guy <guy.tal@...>
Date: Wednesday, July 2, 2014 5:14 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Hello Damian,

I tested the build of OpenMAMA on Visual Studio from the source provided below (RC2 in rpm file).
I found few issues and I have few solutions. For that I opened bug 119 in Bugzilla.
Things that I haven't checked at all are Java and C# projects.

Regards,
Guy

On 6/30/2014 7:27 PM, Damian Maguire wrote:
EPEL 6 RPMs and Windows dynamic build RC2 are now available to download at the following links:


Let me know if anyone sees any issues.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Monday, June 30, 2014 2:42 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

Following a couple of issues raised through testing last week, a number of small fixes have been added (primarily to Scons for Windows). As such I've decided to move to a new RC, and so have now tagged OpenMAMA-2.3.1-RC2. You should be able to pull it from the OpenMAMA git repo using the same instructions as before:

$ git checkout OpenMAMA-2.3.1

I'm currently rebuilding the Windows Zip and Linux RPM's, so will let everyone know when those become available.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Thursday, June 26, 2014 9:54 AM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Morning folks,

Just a quick update, the RC test RPMS and Windows build are available from the following links:


If anyone has a chance to download and test it would be great.

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:
  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache
We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

Cheers, 

Damian

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

$ git checkout OpenMAMA-2.3.1

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

Cheers,

Damian

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all,‧                                                                  
                                                                                    
Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

Firstly, the process we will be following:
  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

As always, if you have any questions let me know.

Thanks,

Damian   

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


_______________________________________________
Openmama-dev mailing list
Openmama-dev@...https://lists.openmama.org/mailman/listinfo/openmama-dev


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


Damian Maguire <DMaguire@...>
 

Morning all, 

Firstly, thanks to everyone who has taken a look at the 2.3.1 release candidates, and provided feedback, your involvement has been greatly appreciated. At this point I think we've addressed most of the smaller issues which have been raised, and the RC's have undergone fairly solid testing across a range of platforms. We've also seen a number of other issues raised, though I don't believe any of these are blockers to this release.

The next steps for the release are as follows:
  • Community feedback
    • If you have any feedback on the release, or believe there are still issues which need to be addressed before this release can go out, please let me know. I'll be closing the Window for this feedback at 5pm BST this evening.
  • Maintainer sign-off
    • Glenn, when you get a chance can you indicate your approval for the release?

Assuming everything looks good, we'll proceed with merging the release branch and updating the other collateral.

Thanks, 

Damian

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

From: Damian Maguire <dmaguire@...>
Date: Monday, June 30, 2014 5:27 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

EPEL 6 RPMs and Windows dynamic build RC2 are now available to download at the following links:


Let me know if anyone sees any issues.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Monday, June 30, 2014 2:42 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

Following a couple of issues raised through testing last week, a number of small fixes have been added (primarily to Scons for Windows). As such I've decided to move to a new RC, and so have now tagged OpenMAMA-2.3.1-RC2. You should be able to pull it from the OpenMAMA git repo using the same instructions as before:

$ git checkout OpenMAMA-2.3.1

I'm currently rebuilding the Windows Zip and Linux RPM's, so will let everyone know when those become available.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Thursday, June 26, 2014 9:54 AM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Morning folks,

Just a quick update, the RC test RPMS and Windows build are available from the following links:


If anyone has a chance to download and test it would be great.

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:
  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache
We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

Cheers, 

Damian

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

$ git checkout OpenMAMA-2.3.1

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

Cheers,

Damian

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all,‧                                                                  
                                                                                    
Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

Firstly, the process we will be following:
  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

As always, if you have any questions let me know.

Thanks,

Damian   

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


Glenn McClements <gmcclements@...>
 

Looks good so far Damian. 

Will hold off until this evening for final sign off in case anything else pops up.

Glenn 

From: Damian Maguire <DMaguire@...>
Date: Thursday, 3 July 2014 10:08
To: Damian Maguire <DMaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Morning all, 

Firstly, thanks to everyone who has taken a look at the 2.3.1 release candidates, and provided feedback, your involvement has been greatly appreciated. At this point I think we've addressed most of the smaller issues which have been raised, and the RC's have undergone fairly solid testing across a range of platforms. We've also seen a number of other issues raised, though I don't believe any of these are blockers to this release.

The next steps for the release are as follows:
  • Community feedback
    • If you have any feedback on the release, or believe there are still issues which need to be addressed before this release can go out, please let me know. I'll be closing the Window for this feedback at 5pm BST this evening.
  • Maintainer sign-off
    • Glenn, when you get a chance can you indicate your approval for the release?

Assuming everything looks good, we'll proceed with merging the release branch and updating the other collateral.

Thanks, 

Damian

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

From: Damian Maguire <dmaguire@...>
Date: Monday, June 30, 2014 5:27 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

EPEL 6 RPMs and Windows dynamic build RC2 are now available to download at the following links:


Let me know if anyone sees any issues.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Monday, June 30, 2014 2:42 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

Following a couple of issues raised through testing last week, a number of small fixes have been added (primarily to Scons for Windows). As such I've decided to move to a new RC, and so have now tagged OpenMAMA-2.3.1-RC2. You should be able to pull it from the OpenMAMA git repo using the same instructions as before:

$ git checkout OpenMAMA-2.3.1

I'm currently rebuilding the Windows Zip and Linux RPM's, so will let everyone know when those become available.

Cheers, 

Damian

From: Damian Maguire <dmaguire@...>
Date: Thursday, June 26, 2014 9:54 AM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Morning folks,

Just a quick update, the RC test RPMS and Windows build are available from the following links:


If anyone has a chance to download and test it would be great.

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:
  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache
We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

Cheers, 

Damian

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all, 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

$ git checkout OpenMAMA-2.3.1

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

Cheers,

Damian

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Afternoon all,‧                                                                  
                                                                                    
Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

Firstly, the process we will be following:
  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

As always, if you have any questions let me know.

Thanks,

Damian   

Damian Maguire – Senior R&D and OpenMAMA Specialist
IntercontinentalExchange | NYSE Technologies
24-26 Adelaide Exchange | Belfast, BT2 8GD
Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.

This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


Alpert, Reed <reed.alpert@...>
 

Hi,

 

No issues uncovered.

 

We’ve run Linux version for Tick42/Rmds & Solace adapters.

Both pub and sub on both adapters.

About 42k Bloomberg watchlist for Rmds.

 

Thanks,

 

Reed.

 


Reed Alpert | Corporate & Investment Bank | Market Data Services | J.P. Morgan | 4 Metrotech Center, 23rd Floor, Brooklyn, NY 11245 | T: 718.242.5198  | M: 917.414.4613 | reed.alpert@...

 

Alternate Contact:  CIB PIM Trading Technology Solutions NA | CIB_PIM_Trading_Technology_Solutions_NA@...

 

From: openmama-dev-bounces@... [mailto:openmama-dev-bounces@...] On Behalf Of Damian Maguire
Sent: Wednesday, July 02, 2014 12:23 PM
To: Guy; openmama-dev@...
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Thanks for that Guy, looks good. I'll take a look through the comments on the BZ ticket, and we can follow up there.

 

Cheers, 

 

Damian

 

From: Guy <guy.tal@...>
Date: Wednesday, July 2, 2014 5:14 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Hello Damian,

I tested the build of OpenMAMA on Visual Studio from the source provided below (RC2 in rpm file).
I found few issues and I have few solutions. For that I opened bug 119 in Bugzilla.
Things that I haven't checked at all are Java and C# projects.

Regards,
Guy

On 6/30/2014 7:27 PM, Damian Maguire wrote:

EPEL 6 RPMs and Windows dynamic build RC2 are now available to download at the following links:

 

 

Let me know if anyone sees any issues.

 

Cheers, 

 

Damian

 

From: Damian Maguire <dmaguire@...>
Date: Monday, June 30, 2014 2:42 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all, 

 

Following a couple of issues raised through testing last week, a number of small fixes have been added (primarily to Scons for Windows). As such I've decided to move to a new RC, and so have now tagged OpenMAMA-2.3.1-RC2. You should be able to pull it from the OpenMAMA git repo using the same instructions as before:

 

$ git checkout OpenMAMA-2.3.1

 

I'm currently rebuilding the Windows Zip and Linux RPM's, so will let everyone know when those become available.

 

Cheers, 

 

Damian

 

From: Damian Maguire <dmaguire@...>
Date: Thursday, June 26, 2014 9:54 AM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Morning folks,

 

Just a quick update, the RC test RPMS and Windows build are available from the following links:

 

 

If anyone has a chance to download and test it would be great.

 

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:

  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache

We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

 

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

 

Cheers, 

 

Damian

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

 

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all, 

 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

 

$ git checkout OpenMAMA-2.3.1

 

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

 

Cheers,

 

Damian

 

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all,                                                                  

                                                                                    

Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

 

Firstly, the process we will be following:

  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

 

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

 

As always, if you have any questions let me know.

 

Thanks,

 

Damian   

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.



This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.





_______________________________________________
Openmama-dev mailing list
Openmama-dev@...https://lists.openmama.org/mailman/listinfo/openmama-dev

 


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


This communication is for informational purposes only. It is not intended as an offer or solicitation for the purchase or sale of any financial instrument or as an official confirmation of any transaction. All market prices, data and other information are not warranted as to completeness or accuracy and are subject to change without notice. Any comments or statements made herein do not necessarily reflect those of JPMorgan Chase & Co., its subsidiaries and affiliates. This transmission may contain information that is proprietary, privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as applicable, for any loss or damage arising in any way from its use. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. Please refer to http://www.jpmorgan.com/pages/disclosures for disclosures relating to European legal entities.


Damian Maguire <DMaguire@...>
 

That's great, cheers for taking a look Reed. 

Damian 

From: <Alpert>, Reed <reed.alpert@...>
Date: Thursday, July 3, 2014 3:05 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

Hi,

 

No issues uncovered.

 

We’ve run Linux version for Tick42/Rmds & Solace adapters.

Both pub and sub on both adapters.

About 42k Bloomberg watchlist for Rmds.

 

Thanks,

 

Reed.

 


Reed Alpert | Corporate & Investment Bank | Market Data Services | J.P. Morgan | 4 Metrotech Center, 23rd Floor, Brooklyn, NY 11245 | T: 718.242.5198  | M: 917.414.4613 | reed.alpert@...

 

Alternate Contact:  CIB PIM Trading Technology Solutions NA | CIB_PIM_Trading_Technology_Solutions_NA@...

 

From: openmama-dev-bounces@... [mailto:openmama-dev-bounces@...] On Behalf Of Damian Maguire
Sent: Wednesday, July 02, 2014 12:23 PM
To: Guy; openmama-dev@...
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Thanks for that Guy, looks good. I'll take a look through the comments on the BZ ticket, and we can follow up there.

 

Cheers, 

 

Damian

 

From: Guy <guy.tal@...>
Date: Wednesday, July 2, 2014 5:14 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Hello Damian,

I tested the build of OpenMAMA on Visual Studio from the source provided below (RC2 in rpm file).
I found few issues and I have few solutions. For that I opened bug 119 in Bugzilla.
Things that I haven't checked at all are Java and C# projects.

Regards,
Guy

On 6/30/2014 7:27 PM, Damian Maguire wrote:

EPEL 6 RPMs and Windows dynamic build RC2 are now available to download at the following links:

 

 

Let me know if anyone sees any issues.

 

Cheers, 

 

Damian

 

From: Damian Maguire <dmaguire@...>
Date: Monday, June 30, 2014 2:42 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all, 

 

Following a couple of issues raised through testing last week, a number of small fixes have been added (primarily to Scons for Windows). As such I've decided to move to a new RC, and so have now tagged OpenMAMA-2.3.1-RC2. You should be able to pull it from the OpenMAMA git repo using the same instructions as before:

 

$ git checkout OpenMAMA-2.3.1

 

I'm currently rebuilding the Windows Zip and Linux RPM's, so will let everyone know when those become available.

 

Cheers, 

 

Damian

 

From: Damian Maguire <dmaguire@...>
Date: Thursday, June 26, 2014 9:54 AM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Morning folks,

 

Just a quick update, the RC test RPMS and Windows build are available from the following links:

 

 

If anyone has a chance to download and test it would be great.

 

With regards to testing, the main aim is to target common use cases, so if you can run through your own apps/bridges etc with the release that would be great. In addition, we'd also really appreciate if testers can take a particular look at:

  • Visual Studio Solution Files
  • Windows Scons builds
  • Fieldcache

We'd also be interested in any feedback from users testing on OSX, or building with alternative compilers (clang, ICC etc).

 

As mentioned before, if you spot some issues please raise them in Bugzilla  and we'll track them there. Any other questions feel free to drop me a mail.

 

Cheers, 

 

Damian

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077

 

From: Damian Maguire <dmaguire@...>
Date: Monday, June 23, 2014 1:54 PM
To: Damian Maguire <dmaguire@...>, "openmama-dev@..." <openmama-dev@...>
Subject: Re: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all, 

 

The OpenMAMA 2.3.1 release branch has now been created, and the first release candidate has been tagged OpenMAMA-2.3.1-rc1. If you clone/update your local git repo, you should be able to check it out using the standard commands:

 

$ git checkout OpenMAMA-2.3.1

 

I'm currently pulling together some RPMs and Windows builds, and will share the links when they're available. 

 

As always, if you see any issues can you raise them in Bugzilla and we'll track the fixes there.

 

Cheers,

 

Damian

 

From: Damian Maguire <dmaguire@...>
Date: Friday, June 13, 2014 4:57 PM
To: "openmama-dev@..." <openmama-dev@...>
Subject: [Openmama-dev] OpenMAMA 2.3.1 Point Release

 

Afternoon all,                                                                  

                                                                                    

Following some of the interest there has been in a few of the changes in next, and given the time since we did the 2.3.0 release, it seems like a good time for a point release. Therefore over the next few weeks we're going to start pulling together OpenMAMA 2.3.1. At this stage I'd like to firm up a few details, and request some community assistance.

 

Firstly, the process we will be following:

  • Over the course of next week we will pin down and merge the last few patches to next. At present there are 3/4 currently in code review which will likely make this bucket. 
    • On Friday (20th) evening we will tag and branch the first RC.
  • The following week will involve testing and bug fixes for the RC (20th – 27th). 
    • If a second RC is required, we will tag and branch again, most likely during the latter half of the week.
    • If absolutely required, testing will roll into the start of the following week (30th June).
  • Once testing is complete and signed off, we will tag the 2.3.1 release and merge next into master.
  • Following the merge, the various release artifacts will be prepared (RPMs, source tarballs, updated documentation and website etc). This should be available by 4th July.

 

So, what I need now is volunteers to test the release candidate - all that's required is that you run through a few tests, and report any bugs or issues on our Bugzilla. If you're willing to spend an hour or two during the week of the 23rd June checking out and building OpenMAMA, and running a few tests, or sanity checking the RC RPM or Zip, can you let me know. In particular can you let me know what platform(s) you're going to be testing on, and if there are any specific features you're particularly interested in looking at (for example, the Visual Studio solution files, or MAMDA order book logic).

 

As always, if you have any questions let me know.

 

Thanks,

 

Damian   

 

Damian Maguire – Senior R&D and OpenMAMA Specialist

IntercontinentalExchange | NYSE Technologies

24-26 Adelaide Exchange | Belfast, BT2 8GD

Tel: +44 2890 822 282 (ext: 452161) | Mob: +44 7540 204 077


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.



This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.





_______________________________________________
Openmama-dev mailing list
Openmama-dev@...https://lists.openmama.org/mailman/listinfo/openmama-dev

 


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.


This communication is for informational purposes only. It is not intended as an offer or solicitation for the purchase or sale of any financial instrument or as an official confirmation of any transaction. All market prices, data and other information are not warranted as to completeness or accuracy and are subject to change without notice. Any comments or statements made herein do not necessarily reflect those of JPMorgan Chase & Co., its subsidiaries and affiliates. This transmission may contain information that is proprietary, privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. Although this transmission and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by JPMorgan Chase & Co., its subsidiaries and affiliates, as applicable, for any loss or damage arising in any way from its use. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. Please refer to http://www.jpmorgan.com/pages/disclosures for disclosures relating to European legal entities.


This message may contain confidential information and is intended for specific recipients unless explicitly noted otherwise. If you have reason to believe you are not an intended recipient of this message, please delete it and notify the sender. This message may not represent the opinion of IntercontinentalExchange Group, Inc. (ICE), NYSE Euronext or any of their subsidiaries or affiliates, and does not constitute a contract or guarantee. Unencrypted electronic mail is not secure and the recipient of this message is expected to provide safeguards from viruses and pursue alternate means of communication where privacy or a binding message is desired.