Make problem - Ubuntu 11.10
Kyle Redelinghuys <awesomistguy@...>
Hi there
I am trying to compile the OpenMAMA software on Ubuntu 11.10 but am having trouble doing so. After ./configure, sudo make throws an error. This is the error I am getting:
/usr/bin/ld: cannot find -lwombatcommon collect2: ld returned 1 exit status make[5]: *** [libmama.la] Error 1 make[5]: Leaving directory `/home/user/Software/OpenMAMA/mama/c_cpp/src/c' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/home/user/Software/OpenMAMA/mama/c_cpp/src/c' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/user/Software/OpenMAMA/mama/c_cpp/src' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/user/Software/OpenMAMA/mama/c_cpp' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/user/Software/OpenMAMA/mama/c_cpp'
What can I install to get this working? Or will this software only work on Redhat/SUSE distributions?
Apologies for mailing direct, searching revealed no answers.
Thanks Kyle
|
|
John Gray <john.gray@...>
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
|
|
Re: installation with AVIS
Jacobraj Benet <JBenet@...>
Hi John,
If possible can you run the mamapublicherc in verbose mode –v –v –v –v and send over the verbose output.
Also please provide us with your mama.properites.
Thanks, Jacob
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: installation with AVIS
John Gray <john.gray@...>
Hi Jacob - see output below mama.properties attached (assumed it would use the default localhost as the transport setting). This is as downloaded from openmama site.
Thanks John
john@john-laptop:~/openmama/OpenMAMA-2.1/bin$ ./mamapublisherc -m avis -s MAMA_INBOUND_TOPIC -tport pub -v -v -v -v
Starting Publisher with: topic: MAMA_INBOUND_TOPIC inbound topic: MAMA_INBOUND_TOPIC interval 0.500000 transport: pub 2012-05-29 04:58:27: (d2fa9700) : mama_loadBridge(): Sucessfully loaded avis bridge from library [mamaavisimpl]
2012-05-29 04:58:27: (d2fa9700) : avisBridge_open(): Entering. 2012-05-29 04:58:27: (d2fa9700) : Using path specified in WOMBAT_PATH 2012-05-29 04:58:27: (d2fa9700) : Using default properties file mama.properties
2012-05-29 04:58:27: (d2fa9700) : Attempting to load MAMA properties from /home/john/openmama/OpenMAMA-2.1/examples/mama/c 2012-05-29 04:58:27: (d2fa9700) : avisBridge_open(): Successfully created Avis queue 2012-05-29 04:58:27: (d2fa9700) :
******************************************************************************** Warning: This is a developer release and has only undergone basic sanity checks. It is for testing only and should not be used in a production environment
********************************************************************************** 2012-05-29 04:58:27: (d2fa9700) : Using path specified in WOMBAT_PATH 2012-05-29 04:58:27: (d2fa9700) : Using default properties file mama.properties
2012-05-29 04:58:27: (d2fa9700) : Attempting to load MAMA properties from /home/john/openmama/OpenMAMA-2.1/examples/mama/c 2012-05-29 04:58:27: (d2fa9700) : mama_loadPayloadBridge(): Sucessfully loaded avismsg payload bridge from library [mamaavismsgimpl]
2012-05-29 04:58:27: (d2fa9700) : mama 6.0.0rc19 (Unable to get version number) (not entitled) 2012-05-29 04:58:27: (d2fa9700) : ******************************************************************************** Note: This build of the MAMA API is not enforcing entitlement checks.
Please see the Licensing file for details ********************************************************************************** 2012-05-29 04:58:27: (d2fa9700) : Entering mamaTransport_create for transport (0x1756850) with name pub
2012-05-29 04:58:27: (d2fa9700) : Creating transport: [pub] 2012-05-29 04:58:27: (d2fa9700) : Number of load balanced sub transports defined: [0] 2012-05-29 04:58:27: (d2fa9700) : Not using load balancing 2012-05-29 04:58:27: (d2fa9700) : initializing Avis transport: pub
2012-05-29 04:58:27: (d2fa9700) : open failed for url: pub 2012-05-29 04:58:27: (d2fa9700) : avis error code=10107, error msg=Transport endpoint is not connected Error creating transport: STATUS_PLATFORM john@john-laptop:~/openmama/OpenMAMA-2.1/bin$ ^C
toggle quoted messageShow quoted text
On 29 May 2012 15:50, Jacobraj Benet <JBenet@...> wrote:
Hi John,
If possible can you run the mamapublicherc in verbose mode –v –v –v –v and send over the verbose output.
Also please provide us with your mama.properites.
Thanks, Jacob
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: installation with AVIS
Mike Schonberg <mschonberg@...>
Is the avis daemon running? Regards, -Mike
toggle quoted messageShow quoted text
From: openmama-users-bounces@... [mailto:openmama-users-bounces@...] On Behalf Of John Gray Sent: Monday, May 28, 2012 12:50 PM To: openmama-users@... Subject: [Openmama-users] installation with AVIS Hello I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error.... avis error code=10107, error msg=Transport endpoint is not connected mamapublisherc -m avis -tport pub Avis tests for secure_sender and secure_receiver seem to work fine. What needs done to correct this?
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: installation with AVIS
Jacobraj Benet <JBenet@...>
Thanks John,
For the mamapublisherc to work, you would need to run the avis daemon running on your local/remote machine.
Then you would need point the avis transport to the ipaddress of where you have the avis daemon is running
For example
My mama.properties. mama.avis.transport.avis_tport.url=elvin://0.0.0.0
My command line Mamapublisherc –m avis –tort avis_tport
My Avis Dameon I have my avis daemon running on localhost.
Thanks, Jacob
toggle quoted messageShow quoted text
Hi Jacob - see output below
mama.properties attached (assumed it would use the default localhost as the transport setting). This is as downloaded from openmama site. Thanks
John
john@john-laptop:~/openmama/OpenMAMA-2.1/bin$ ./mamapublisherc -m avis -s MAMA_INBOUND_TOPIC -tport pub -v -v -v -v
Starting Publisher with:
topic: MAMA_INBOUND_TOPIC
inbound topic: MAMA_INBOUND_TOPIC
interval 0.500000
transport: pub
2012-05-29 04:58:27: (d2fa9700) : mama_loadBridge(): Sucessfully loaded avis bridge from library [mamaavisimpl]
2012-05-29 04:58:27: (d2fa9700) : avisBridge_open(): Entering.
2012-05-29 04:58:27: (d2fa9700) : Using path specified in WOMBAT_PATH
2012-05-29 04:58:27: (d2fa9700) : Using default properties file mama.properties
2012-05-29 04:58:27: (d2fa9700) : Attempting to load MAMA properties from /home/john/openmama/OpenMAMA-2.1/examples/mama/c
2012-05-29 04:58:27: (d2fa9700) : avisBridge_open(): Successfully created Avis queue
2012-05-29 04:58:27: (d2fa9700) :
********************************************************************************
Warning: This is a developer release and has only undergone basic sanity checks.
It is for testing only and should not be used in a production environment
**********************************************************************************
2012-05-29 04:58:27: (d2fa9700) : Using path specified in WOMBAT_PATH
2012-05-29 04:58:27: (d2fa9700) : Using default properties file mama.properties
2012-05-29 04:58:27: (d2fa9700) : Attempting to load MAMA properties from /home/john/openmama/OpenMAMA-2.1/examples/mama/c
2012-05-29 04:58:27: (d2fa9700) : mama_loadPayloadBridge(): Sucessfully loaded avismsg payload bridge from library [mamaavismsgimpl]
2012-05-29 04:58:27: (d2fa9700) : mama 6.0.0rc19 (Unable to get version number) (not entitled)
2012-05-29 04:58:27: (d2fa9700) :
********************************************************************************
Note: This build of the MAMA API is not enforcing entitlement checks.
Please see the Licensing file for details
**********************************************************************************
2012-05-29 04:58:27: (d2fa9700) : Entering mamaTransport_create for transport (0x1756850) with name pub
2012-05-29 04:58:27: (d2fa9700) : Creating transport: [pub]
2012-05-29 04:58:27: (d2fa9700) : Number of load balanced sub transports defined: [0]
2012-05-29 04:58:27: (d2fa9700) : Not using load balancing
2012-05-29 04:58:27: (d2fa9700) : initializing Avis transport: pub
2012-05-29 04:58:27: (d2fa9700) : open failed for url: pub
2012-05-29 04:58:27: (d2fa9700) : avis error code=10107, error msg=Transport endpoint is not connected
Error creating transport: STATUS_PLATFORM
john@john-laptop:~/openmama/OpenMAMA-2.1/bin$ ^C On 29 May 2012 15:50, Jacobraj Benet <JBenet@...> wrote: Hi John,
If possible can you run the mamapublicherc in verbose mode –v –v –v –v and send over the verbose output.
Also please provide us with your mama.properites.
Thanks, Jacob
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
Please consider the environment before printing this email. Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message
to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message,
and please delete it from your system. Thank you. NYSE Euronext.
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: installation with AVIS
John Gray <john.gray@...>
no - how do I start the avis daemon on the localhost?
toggle quoted messageShow quoted text
On 29 May 2012 16:10, Mike Schonberg <mschonberg@...> wrote:
Is the avis daemon running?
Regards,
-Mike
Hello I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine. What needs done to correct this?
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: installation with AVIS
Mike Schonberg <mschonberg@...>
toggle quoted messageShow quoted text
From: John Gray [mailto:john.gray@...] Sent: Tuesday, May 29, 2012 8:32 AM To: Mike Schonberg Cc: openmama-users@... Subject: Re: [Openmama-users] installation with AVIS no - how do I start the avis daemon on the localhost? On 29 May 2012 16:10, Mike Schonberg <mschonberg@...> wrote: Is the avis daemon running? Regards, -Mike Hello I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error.... avis error code=10107, error msg=Transport endpoint is not connected mamapublisherc -m avis -tport pub Avis tests for secure_sender and secure_receiver seem to work fine. What needs done to correct this?
Please consider the environment before printing this email. Visit our website at http://www.nyse.com ***************************************************************************** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: installation with AVIS
John Gray <john.gray@...>
Hey - thats fixed it - thanks!
Maybe need to add that to the mama README file. avisd is placed in the /usr/local/sbin folder. Also, was able to run publisher:
./mamapublisherc -m avis -tport avis and worked fine.
j
toggle quoted messageShow quoted text
On 29 May 2012 16:37, Mike Schonberg <mschonberg@...> wrote:
avisd –v.
-Mike
From: John Gray [mailto:john.gray@...]
Sent: Tuesday, May 29, 2012 8:32 AM To: Mike Schonberg Cc: openmama-users@...
Subject: Re: [Openmama-users] installation with AVIS
no - how do I start the avis daemon on the localhost?
On 29 May 2012 16:10, Mike Schonberg <mschonberg@...> wrote:
Is the avis daemon running?
Regards, -Mike
Hello I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine. What needs done to correct this?
Please consider the environment before printing this email. Visit our website at http://www.nyse.com
***************************************************************************** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Building Middleware for openMAMA.
kulbhushan chaskar <kulbhushanchaskar@...>
Hi, I am trying to buid middleware like Avis, also trying to write my own network library which is elvin in case of Avis, but it is in Java and I am trying to write it in "C". I somehow manage to write it, i.e. i successfully passed message in between mamaPublisherc and mamaSubscriberc. I need more help regarding how to write router code in "C" where i get information about it Thanx!!!!!!!!!!! ------------------------------------------------------------------------------------------------------------------ On 5/29/12, openmama-users-request@lists.openmama.org <openmama-users-request@lists.openmama.org> wrote: Send Openmama-users mailing list submissions to openmama-users@lists.openmama.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.openmama.org/listinfo/openmama-users or, via email, send a message with subject or body 'help' to openmama-users-request@lists.openmama.org
You can reach the person managing the list at openmama-users-owner@lists.openmama.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Openmama-users digest..."
Today's Topics:
1. installation with AVIS (John Gray) 2. Re: installation with AVIS (Jacobraj Benet) 3. Re: installation with AVIS (John Gray) 4. Re: installation with AVIS (Mike Schonberg)
----------------------------------------------------------------------
Message: 1 Date: Mon, 28 May 2012 20:49:38 +0100 From: John Gray <john.gray@neueda.com> To: openmama-users@lists.openmama.org Subject: [Openmama-users] installation with AVIS Message-ID: <CAKvjaeZ76k67aFft4b41-=FCVmwjm2RR9nFs1V-Mr3Co7EqxPA@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1"
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.openmama.org/pipermail/openmama-users/attachments/20120528/ca367682/attachment-0001.html>
------------------------------
Message: 2 Date: Tue, 29 May 2012 09:50:53 -0500 From: Jacobraj Benet <JBenet@nyx.com> To: John Gray <john.gray@neueda.com>, "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org> Subject: Re: [Openmama-users] installation with AVIS Message-ID: <CBEA4BB9.4B6A%jbenet@nyx.com> Content-Type: text/plain; charset="windows-1252"
Hi John,
If possible can you run the mamapublicherc in verbose mode ?v ?v ?v ?v and send over the verbose output.
Also please provide us with your mama.properites.
Thanks, Jacob
From: John Gray <john.gray@neueda.com<mailto:john.gray@neueda.com>> To: "openmama-users@lists.openmama.org<mailto:openmama-users@lists.openmama.org>" <openmama-users@lists.openmama.org<mailto:openmama-users@lists.openmama.org>> Subject: [Openmama-users] installation with AVIS
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John ------------------------------------------------------------------------------
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com <http://www.nyse.com> ***************************************************************************** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.openmama.org/pipermail/openmama-users/attachments/20120529/0a237897/attachment-0001.html>
------------------------------
Message: 3 Date: Tue, 29 May 2012 16:04:34 +0100 From: John Gray <john.gray@neueda.com> To: Jacobraj Benet <JBenet@nyx.com> Cc: "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org> Subject: Re: [Openmama-users] installation with AVIS Message-ID: <CAKvjaebsAG1xU2VSRtE4JHO1hhpf6p3=r9ZDVjUdNfmmabsOnw@mail.gmail.com> Content-Type: text/plain; charset="windows-1252"
Hi Jacob - see output below mama.properties attached (assumed it would use the default localhost as the transport setting). This is as downloaded from openmama site.
Thanks John
john@john-laptop:~/openmama/OpenMAMA-2.1/bin$ ./mamapublisherc -m avis -s MAMA_INBOUND_TOPIC -tport pub -v -v -v -v Starting Publisher with: topic: MAMA_INBOUND_TOPIC inbound topic: MAMA_INBOUND_TOPIC interval 0.500000 transport: pub 2012-05-29 04:58:27: (d2fa9700) : mama_loadBridge(): Sucessfully loaded avis bridge from library [mamaavisimpl] 2012-05-29 04:58:27: (d2fa9700) : avisBridge_open(): Entering. 2012-05-29 04:58:27: (d2fa9700) : Using path specified in WOMBAT_PATH 2012-05-29 04:58:27: (d2fa9700) : Using default properties file mama.properties 2012-05-29 04:58:27: (d2fa9700) : Attempting to load MAMA properties from /home/john/openmama/OpenMAMA-2.1/examples/mama/c 2012-05-29 04:58:27: (d2fa9700) : avisBridge_open(): Successfully created Avis queue 2012-05-29 04:58:27: (d2fa9700) : ******************************************************************************** Warning: This is a developer release and has only undergone basic sanity checks. It is for testing only and should not be used in a production environment ********************************************************************************** 2012-05-29 04:58:27: (d2fa9700) : Using path specified in WOMBAT_PATH 2012-05-29 04:58:27: (d2fa9700) : Using default properties file mama.properties 2012-05-29 04:58:27: (d2fa9700) : Attempting to load MAMA properties from /home/john/openmama/OpenMAMA-2.1/examples/mama/c 2012-05-29 04:58:27: (d2fa9700) : mama_loadPayloadBridge(): Sucessfully loaded avismsg payload bridge from library [mamaavismsgimpl] 2012-05-29 04:58:27: (d2fa9700) : mama 6.0.0rc19 (Unable to get version number) (not entitled) 2012-05-29 04:58:27: (d2fa9700) : ******************************************************************************** Note: This build of the MAMA API is not enforcing entitlement checks. Please see the Licensing file for details ********************************************************************************** 2012-05-29 04:58:27: (d2fa9700) : Entering mamaTransport_create for transport (0x1756850) with name pub 2012-05-29 04:58:27: (d2fa9700) : Creating transport: [pub] 2012-05-29 04:58:27: (d2fa9700) : Number of load balanced sub transports defined: [0] 2012-05-29 04:58:27: (d2fa9700) : Not using load balancing 2012-05-29 04:58:27: (d2fa9700) : initializing Avis transport: pub 2012-05-29 04:58:27: (d2fa9700) : open failed for url: pub 2012-05-29 04:58:27: (d2fa9700) : avis error code=10107, error msg=Transport endpoint is not connected Error creating transport: STATUS_PLATFORM john@john-laptop:~/openmama/OpenMAMA-2.1/bin$ ^C
On 29 May 2012 15:50, Jacobraj Benet <JBenet@nyx.com> wrote:
Hi John,
If possible can you run the mamapublicherc in verbose mode ?v ?v ?v ?v and send over the verbose output.
Also please provide us with your mama.properites.
Thanks, Jacob
From: John Gray <john.gray@neueda.com> To: "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org Subject: [Openmama-users] installation with AVIS
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
------------------------------
*Please consider the environment before printing this email.*
*Visit our website at http://www.nyse.com *****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext. *
-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.openmama.org/pipermail/openmama-users/attachments/20120529/3463f6a7/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: mama.properties Type: application/octet-stream Size: 1852 bytes Desc: not available URL: <http://lists.openmama.org/pipermail/openmama-users/attachments/20120529/3463f6a7/attachment-0001.obj>
------------------------------
Message: 4 Date: Tue, 29 May 2012 11:10:45 -0400 From: Mike Schonberg <mschonberg@nyx.com> To: John Gray <john.gray@neueda.com>, "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org> Subject: Re: [Openmama-users] installation with AVIS Message-ID: <F75B69A6500FB8458740F47B9F751AFE86AEDA14A6@PM1COEXM03.ad.NYX.com> Content-Type: text/plain; charset="us-ascii"
Is the avis daemon running?
Regards, -Mike
From: openmama-users-bounces@lists.openmama.org [mailto:openmama-users-bounces@lists.openmama.org] On Behalf Of John Gray Sent: Monday, May 28, 2012 12:50 PM To: openmama-users@lists.openmama.org Subject: [Openmama-users] installation with AVIS
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John ------------------------------------------------------------------------------
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com <http://www.nyse.com> ***************************************************************************** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.openmama.org/pipermail/openmama-users/attachments/20120529/61ead561/attachment.html>
------------------------------
_______________________________________________ Openmama-users mailing list Openmama-users@lists.openmama.org http://lists.openmama.org/listinfo/openmama-users
End of Openmama-users Digest, Vol 2, Issue 1 ********************************************
|
|
Re: Building Middleware for openMAMA.
Jacobraj Benet <JBenet@...>
Hi Chaskar, Just to clarify, when you mean "router code", are you referring to the bridge that connects the middleware and your application? OR are you referring to the code in the middleware component? What specific assistance do you need with writing the bridge interface in C? If I have mistaken your requirement, please clarify. Thanks, Jacob On 6/1/12 9:47 AM, "kulbhushan chaskar" <kulbhushanchaskar@gmail.com> wrote: Hi,
I am trying to buid middleware like Avis, also trying to write my own network library which is elvin in case of Avis, but it is in Java and I am trying to write it in "C". I somehow manage to write it, i.e. i successfully passed message in between mamaPublisherc and mamaSubscriberc. I need more help regarding how to write router code in "C" where i get information about it
Thanx!!!!!!!!!!! -------------------------------------------------------------------------- ----------------------------------------
On 5/29/12, openmama-users-request@lists.openmama.org <openmama-users-request@lists.openmama.org> wrote:
Send Openmama-users mailing list submissions to openmama-users@lists.openmama.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.openmama.org/listinfo/openmama-users or, via email, send a message with subject or body 'help' to openmama-users-request@lists.openmama.org
You can reach the person managing the list at openmama-users-owner@lists.openmama.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Openmama-users digest..."
Today's Topics:
1. installation with AVIS (John Gray) 2. Re: installation with AVIS (Jacobraj Benet) 3. Re: installation with AVIS (John Gray) 4. Re: installation with AVIS (Mike Schonberg)
----------------------------------------------------------------------
Message: 1 Date: Mon, 28 May 2012 20:49:38 +0100 From: John Gray <john.gray@neueda.com> To: openmama-users@lists.openmama.org Subject: [Openmama-users] installation with AVIS Message-ID: <CAKvjaeZ76k67aFft4b41-=FCVmwjm2RR9nFs1V-Mr3Co7EqxPA@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1"
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John -------------- next part -------------- An HTML attachment was scrubbed... URL:
<http://lists.openmama.org/pipermail/openmama-users/attachments/20120528/ ca367682/attachment-0001.html>
------------------------------
Message: 2 Date: Tue, 29 May 2012 09:50:53 -0500 From: Jacobraj Benet <JBenet@nyx.com> To: John Gray <john.gray@neueda.com>, "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org> Subject: Re: [Openmama-users] installation with AVIS Message-ID: <CBEA4BB9.4B6A%jbenet@nyx.com> Content-Type: text/plain; charset="windows-1252"
Hi John,
If possible can you run the mamapublicherc in verbose mode ?v ?v ?v ?v and send over the verbose output.
Also please provide us with your mama.properites.
Thanks, Jacob
From: John Gray <john.gray@neueda.com<mailto:john.gray@neueda.com>> To:
"openmama-users@lists.openmama.org<mailto:openmama-users@lists.openmama.o rg>"
<openmama-users@lists.openmama.org<mailto:openmama-users@lists.openmama.o rg>> Subject: [Openmama-users] installation with AVIS
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
------------------------------------------------------------------------- -----
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com <http://www.nyse.com>
************************************************************************* **** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext. -------------- next part -------------- An HTML attachment was scrubbed... URL:
<http://lists.openmama.org/pipermail/openmama-users/attachments/20120529/ 0a237897/attachment-0001.html>
------------------------------
Message: 3 Date: Tue, 29 May 2012 16:04:34 +0100 From: John Gray <john.gray@neueda.com> To: Jacobraj Benet <JBenet@nyx.com> Cc: "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org> Subject: Re: [Openmama-users] installation with AVIS Message-ID: <CAKvjaebsAG1xU2VSRtE4JHO1hhpf6p3=r9ZDVjUdNfmmabsOnw@mail.gmail.com> Content-Type: text/plain; charset="windows-1252"
Hi Jacob - see output below mama.properties attached (assumed it would use the default localhost as the transport setting). This is as downloaded from openmama site.
Thanks John
john@john-laptop:~/openmama/OpenMAMA-2.1/bin$ ./mamapublisherc -m avis -s MAMA_INBOUND_TOPIC -tport pub -v -v -v -v Starting Publisher with: topic: MAMA_INBOUND_TOPIC inbound topic: MAMA_INBOUND_TOPIC interval 0.500000 transport: pub 2012-05-29 04:58:27: (d2fa9700) : mama_loadBridge(): Sucessfully loaded avis bridge from library [mamaavisimpl] 2012-05-29 04:58:27: (d2fa9700) : avisBridge_open(): Entering. 2012-05-29 04:58:27: (d2fa9700) : Using path specified in WOMBAT_PATH 2012-05-29 04:58:27: (d2fa9700) : Using default properties file mama.properties 2012-05-29 04:58:27: (d2fa9700) : Attempting to load MAMA properties from /home/john/openmama/OpenMAMA-2.1/examples/mama/c 2012-05-29 04:58:27: (d2fa9700) : avisBridge_open(): Successfully created Avis queue 2012-05-29 04:58:27: (d2fa9700) :
************************************************************************* ******* Warning: This is a developer release and has only undergone basic sanity checks. It is for testing only and should not be used in a production environment
************************************************************************* ********* 2012-05-29 04:58:27: (d2fa9700) : Using path specified in WOMBAT_PATH 2012-05-29 04:58:27: (d2fa9700) : Using default properties file mama.properties 2012-05-29 04:58:27: (d2fa9700) : Attempting to load MAMA properties from /home/john/openmama/OpenMAMA-2.1/examples/mama/c 2012-05-29 04:58:27: (d2fa9700) : mama_loadPayloadBridge(): Sucessfully loaded avismsg payload bridge from library [mamaavismsgimpl] 2012-05-29 04:58:27: (d2fa9700) : mama 6.0.0rc19 (Unable to get version number) (not entitled) 2012-05-29 04:58:27: (d2fa9700) :
************************************************************************* ******* Note: This build of the MAMA API is not enforcing entitlement checks. Please see the Licensing file for details
************************************************************************* ********* 2012-05-29 04:58:27: (d2fa9700) : Entering mamaTransport_create for transport (0x1756850) with name pub 2012-05-29 04:58:27: (d2fa9700) : Creating transport: [pub] 2012-05-29 04:58:27: (d2fa9700) : Number of load balanced sub transports defined: [0] 2012-05-29 04:58:27: (d2fa9700) : Not using load balancing 2012-05-29 04:58:27: (d2fa9700) : initializing Avis transport: pub 2012-05-29 04:58:27: (d2fa9700) : open failed for url: pub 2012-05-29 04:58:27: (d2fa9700) : avis error code=10107, error msg=Transport endpoint is not connected Error creating transport: STATUS_PLATFORM john@john-laptop:~/openmama/OpenMAMA-2.1/bin$ ^C
On 29 May 2012 15:50, Jacobraj Benet <JBenet@nyx.com> wrote:
Hi John,
If possible can you run the mamapublicherc in verbose mode ?v ?v ?v ?v and send over the verbose output.
Also please provide us with your mama.properites.
Thanks, Jacob
From: John Gray <john.gray@neueda.com> To: "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org Subject: [Openmama-users] installation with AVIS
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
------------------------------
*Please consider the environment before printing this email.*
*Visit our website at http://www.nyse.com
************************************************************************ *****
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext. *
-------------- next part -------------- An HTML attachment was scrubbed... URL:
<http://lists.openmama.org/pipermail/openmama-users/attachments/20120529/ 3463f6a7/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: mama.properties Type: application/octet-stream Size: 1852 bytes Desc: not available URL:
<http://lists.openmama.org/pipermail/openmama-users/attachments/20120529/ 3463f6a7/attachment-0001.obj>
------------------------------
Message: 4 Date: Tue, 29 May 2012 11:10:45 -0400 From: Mike Schonberg <mschonberg@nyx.com> To: John Gray <john.gray@neueda.com>, "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org> Subject: Re: [Openmama-users] installation with AVIS Message-ID: <F75B69A6500FB8458740F47B9F751AFE86AEDA14A6@PM1COEXM03.ad.NYX.com> Content-Type: text/plain; charset="us-ascii"
Is the avis daemon running?
Regards, -Mike
From: openmama-users-bounces@lists.openmama.org [mailto:openmama-users-bounces@lists.openmama.org] On Behalf Of John Gray Sent: Monday, May 28, 2012 12:50 PM To: openmama-users@lists.openmama.org Subject: [Openmama-users] installation with AVIS
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
------------------------------------------------------------------------- -----
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com <http://www.nyse.com>
************************************************************************* **** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext. -------------- next part -------------- An HTML attachment was scrubbed... URL:
<http://lists.openmama.org/pipermail/openmama-users/attachments/20120529/ 61ead561/attachment.html>
------------------------------
_______________________________________________ Openmama-users mailing list Openmama-users@lists.openmama.org http://lists.openmama.org/listinfo/openmama-users
End of Openmama-users Digest, Vol 2, Issue 1 ********************************************
_______________________________________________ Openmama-users mailing list Openmama-users@lists.openmama.org http://lists.openmama.org/listinfo/openmama-users Please consider the environment before printing this email. Visit our website at http://www.nyse.com**************************************************** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: installation with AVIS
John Gray <john.gray@...>
Hey Guys
I have tried building the openmama examples - but can't get this to happen.
The ./configure --with-avis=/usr/local comes back with unknown parameter --with-avis
Also, the /opt/openmama files get updated from the build - but the files in openmama-2.1/bin and openmama-2.1/lib don't change from the original dates.
Am I doing something wrong - I would like to able to edit the examples for running tests.
thanks John
toggle quoted messageShow quoted text
On 29 May 2012 16:49, John Gray <john.gray@...> wrote:
Hey - thats fixed it - thanks!
Maybe need to add that to the mama README file. avisd is placed in the /usr/local/sbin folder.
Also, was able to run publisher
./mamapublisherc -m avis -tport avis and worked fine.
j On 29 May 2012 16:37, Mike Schonberg <mschonberg@...> wrote:
avisd –v.
-Mike
From: John Gray [mailto:john.gray@...]
Sent: Tuesday, May 29, 2012 8:32 AM To: Mike Schonberg Cc: openmama-users@...
Subject: Re: [Openmama-users] installation with AVIS
no - how do I start the avis daemon on the localhost?
On 29 May 2012 16:10, Mike Schonberg <mschonberg@...> wrote:
Is the avis daemon running?
Regards, -Mike
Hello I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine. What needs done to correct this?
Please consider the environment before printing this email. Visit our website at http://www.nyse.com
***************************************************************************** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: installation with AVIS
Jacobraj Benet <JBenet@...>
Hi John,
The configure script in openmama accepts —avis-path instead of —with-avis, so you could try the following.
./configure —avis-path=/usr/local
Also if you would like the openmama-2.1 to be updated, then you would need pass the correct location as part of the prefix
So I would recommend using the following configure arguments.
./configure —avis-path=/usr/local —prefix=openmama-2.1
Thanks,
Jacob
Hey Guys
I have tried building the openmama examples - but can't get this to happen.
The ./configure --with-avis=/usr/local comes back with unknown parameter --with-avis
Also, the /opt/openmama files get updated from the build - but the files in openmama-2.1/bin and openmama-2.1/lib don't change from the original dates.
Am I doing something wrong - I would like to able to edit the examples for running tests.
thanks
John
On 29 May 2012 16:49, John Gray <john.gray@...> wrote:
Hey - thats fixed it - thanks!
Maybe need to add that to the mama README file. avisd is placed in the /usr/local/sbin folder.
Also, was able to run publisher
./mamapublisherc -m avis -tport avis and worked fine.
j
On 29 May 2012 16:37, Mike Schonberg <mschonberg@...> wrote:
avisd –v.
-Mike
From: John Gray [mailto:john.gray@...]
Sent: Tuesday, May 29, 2012 8:32 AM
To: Mike Schonberg
Cc: openmama-users@...
Subject: Re: [Openmama-users] installation with AVIS
no - how do I start the avis daemon on the localhost?
On 29 May 2012 16:10, Mike Schonberg <mschonberg@...> wrote:
Is the avis daemon running?
Regards,
-Mike
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message
to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message,
and please delete it from your system. Thank you. NYSE Euronext.
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message
to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message,
and please delete it from your system. Thank you. NYSE Euronext.
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: Building Middleware for openMAMA.
Jacobraj Benet <JBenet@...>
Thanks for clarifying. The first release of the OpenMAMA was only in C and the bridge implementation was also in C and this release was expected to only work on the Avis router C implementation. In order to work with the Java Avis implementation, you would need the mamajni implementation of OpenMAMA, which was only available on the second release. Here is the link to download the C implementation of the Avis router middleware libavis.so http://avis.sourceforge.net/client_library.htmlHope this helps, Thanks, Jacob On 6/1/12 10:26 AM, "kulbhushan chaskar" <kulbhushanchaskar@gmail.com> wrote: Hi Jacob, I am referring to the code in the middleware component, first release of openMAMA is in C, so Avis bridge code also in C but its router( networking lib.) is in Java. So I thinks to write router code in C just for to see how openMAMA works.
Regards, Kulbhushan Chaskar.
On 6/1/12, Jacobraj Benet <JBenet@nyx.com> wrote:
Hi Chaskar,
Just to clarify, when you mean "router code", are you referring to the bridge that connects the middleware and your application? OR are you referring to the code in the middleware component?
What specific assistance do you need with writing the bridge interface in C? If I have mistaken your requirement, please clarify.
Thanks, Jacob
On 6/1/12 9:47 AM, "kulbhushan chaskar" <kulbhushanchaskar@gmail.com> wrote:
Hi,
I am trying to buid middleware like Avis, also trying to write my own network library which is elvin in case of Avis, but it is in Java and I am trying to write it in "C". I somehow manage to write it, i.e. i successfully passed message in between mamaPublisherc and mamaSubscriberc. I need more help regarding how to write router code in "C" where i get information about it
Thanx!!!!!!!!!!! ------------------------------------------------------------------------ -- ----------------------------------------
On 5/29/12, openmama-users-request@lists.openmama.org <openmama-users-request@lists.openmama.org> wrote:
Send Openmama-users mailing list submissions to openmama-users@lists.openmama.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.openmama.org/listinfo/openmama-users or, via email, send a message with subject or body 'help' to openmama-users-request@lists.openmama.org
You can reach the person managing the list at openmama-users-owner@lists.openmama.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Openmama-users digest..."
Today's Topics:
1. installation with AVIS (John Gray) 2. Re: installation with AVIS (Jacobraj Benet) 3. Re: installation with AVIS (John Gray) 4. Re: installation with AVIS (Mike Schonberg)
----------------------------------------------------------------------
Message: 1 Date: Mon, 28 May 2012 20:49:38 +0100 From: John Gray <john.gray@neueda.com> To: openmama-users@lists.openmama.org Subject: [Openmama-users] installation with AVIS Message-ID: <CAKvjaeZ76k67aFft4b41-=FCVmwjm2RR9nFs1V-Mr3Co7EqxPA@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1"
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John -------------- next part -------------- An HTML attachment was scrubbed... URL:
<http://lists.openmama.org/pipermail/openmama-users/attachments/2012052 8/ ca367682/attachment-0001.html>
------------------------------
Message: 2 Date: Tue, 29 May 2012 09:50:53 -0500 From: Jacobraj Benet <JBenet@nyx.com> To: John Gray <john.gray@neueda.com>, "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org> Subject: Re: [Openmama-users] installation with AVIS Message-ID: <CBEA4BB9.4B6A%jbenet@nyx.com> Content-Type: text/plain; charset="windows-1252"
Hi John,
If possible can you run the mamapublicherc in verbose mode ?v ?v ?v ?v and send over the verbose output.
Also please provide us with your mama.properites.
Thanks, Jacob
From: John Gray <john.gray@neueda.com<mailto:john.gray@neueda.com>> To:
"openmama-users@lists.openmama.org<mailto:openmama-users@lists.openmama .o rg>"
<openmama-users@lists.openmama.org<mailto:openmama-users@lists.openmama .o rg>> Subject: [Openmama-users] installation with AVIS
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
----------------------------------------------------------------------- -- -----
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com <http://www.nyse.com>
*********************************************************************** ** **** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext. -------------- next part -------------- An HTML attachment was scrubbed... URL:
<http://lists.openmama.org/pipermail/openmama-users/attachments/2012052 9/ 0a237897/attachment-0001.html>
------------------------------
Message: 3 Date: Tue, 29 May 2012 16:04:34 +0100 From: John Gray <john.gray@neueda.com> To: Jacobraj Benet <JBenet@nyx.com> Cc: "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org> Subject: Re: [Openmama-users] installation with AVIS Message-ID: <CAKvjaebsAG1xU2VSRtE4JHO1hhpf6p3=r9ZDVjUdNfmmabsOnw@mail.gmail.com> Content-Type: text/plain; charset="windows-1252"
Hi Jacob - see output below mama.properties attached (assumed it would use the default localhost as the transport setting). This is as downloaded from openmama site.
Thanks John
john@john-laptop:~/openmama/OpenMAMA-2.1/bin$ ./mamapublisherc -m avis -s MAMA_INBOUND_TOPIC -tport pub -v -v -v -v Starting Publisher with: topic: MAMA_INBOUND_TOPIC inbound topic: MAMA_INBOUND_TOPIC interval 0.500000 transport: pub 2012-05-29 04:58:27: (d2fa9700) : mama_loadBridge(): Sucessfully loaded avis bridge from library [mamaavisimpl] 2012-05-29 04:58:27: (d2fa9700) : avisBridge_open(): Entering. 2012-05-29 04:58:27: (d2fa9700) : Using path specified in WOMBAT_PATH 2012-05-29 04:58:27: (d2fa9700) : Using default properties file mama.properties 2012-05-29 04:58:27: (d2fa9700) : Attempting to load MAMA properties from /home/john/openmama/OpenMAMA-2.1/examples/mama/c 2012-05-29 04:58:27: (d2fa9700) : avisBridge_open(): Successfully created Avis queue 2012-05-29 04:58:27: (d2fa9700) :
*********************************************************************** ** ******* Warning: This is a developer release and has only undergone basic sanity checks. It is for testing only and should not be used in a production environment
*********************************************************************** ** ********* 2012-05-29 04:58:27: (d2fa9700) : Using path specified in WOMBAT_PATH 2012-05-29 04:58:27: (d2fa9700) : Using default properties file mama.properties 2012-05-29 04:58:27: (d2fa9700) : Attempting to load MAMA properties from /home/john/openmama/OpenMAMA-2.1/examples/mama/c 2012-05-29 04:58:27: (d2fa9700) : mama_loadPayloadBridge(): Sucessfully loaded avismsg payload bridge from library [mamaavismsgimpl] 2012-05-29 04:58:27: (d2fa9700) : mama 6.0.0rc19 (Unable to get version number) (not entitled) 2012-05-29 04:58:27: (d2fa9700) :
*********************************************************************** ** ******* Note: This build of the MAMA API is not enforcing entitlement checks. Please see the Licensing file for details
*********************************************************************** ** ********* 2012-05-29 04:58:27: (d2fa9700) : Entering mamaTransport_create for transport (0x1756850) with name pub 2012-05-29 04:58:27: (d2fa9700) : Creating transport: [pub] 2012-05-29 04:58:27: (d2fa9700) : Number of load balanced sub transports defined: [0] 2012-05-29 04:58:27: (d2fa9700) : Not using load balancing 2012-05-29 04:58:27: (d2fa9700) : initializing Avis transport: pub 2012-05-29 04:58:27: (d2fa9700) : open failed for url: pub 2012-05-29 04:58:27: (d2fa9700) : avis error code=10107, error msg=Transport endpoint is not connected Error creating transport: STATUS_PLATFORM john@john-laptop:~/openmama/OpenMAMA-2.1/bin$ ^C
On 29 May 2012 15:50, Jacobraj Benet <JBenet@nyx.com> wrote:
Hi John,
If possible can you run the mamapublicherc in verbose mode ?v ?v ?v ?v and send over the verbose output.
Also please provide us with your mama.properites.
Thanks, Jacob
From: John Gray <john.gray@neueda.com> To: "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org Subject: [Openmama-users] installation with AVIS
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
------------------------------
*Please consider the environment before printing this email.*
*Visit our website at http://www.nyse.com
********************************************************************** ** *****
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext. *
-------------- next part -------------- An HTML attachment was scrubbed... URL:
<http://lists.openmama.org/pipermail/openmama-users/attachments/2012052 9/ 3463f6a7/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: mama.properties Type: application/octet-stream Size: 1852 bytes Desc: not available URL:
<http://lists.openmama.org/pipermail/openmama-users/attachments/2012052 9/ 3463f6a7/attachment-0001.obj>
------------------------------
Message: 4 Date: Tue, 29 May 2012 11:10:45 -0400 From: Mike Schonberg <mschonberg@nyx.com> To: John Gray <john.gray@neueda.com>, "openmama-users@lists.openmama.org" <openmama-users@lists.openmama.org> Subject: Re: [Openmama-users] installation with AVIS Message-ID: <F75B69A6500FB8458740F47B9F751AFE86AEDA14A6@PM1COEXM03.ad.NYX.com> Content-Type: text/plain; charset="us-ascii"
Is the avis daemon running?
Regards, -Mike
From: openmama-users-bounces@lists.openmama.org [mailto:openmama-users-bounces@lists.openmama.org] On Behalf Of John Gray Sent: Monday, May 28, 2012 12:50 PM To: openmama-users@lists.openmama.org Subject: [Openmama-users] installation with AVIS
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line: mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks John
----------------------------------------------------------------------- -- -----
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com <http://www.nyse.com>
*********************************************************************** ** **** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext. -------------- next part -------------- An HTML attachment was scrubbed... URL:
<http://lists.openmama.org/pipermail/openmama-users/attachments/2012052 9/ 61ead561/attachment.html>
------------------------------
_______________________________________________ Openmama-users mailing list Openmama-users@lists.openmama.org http://lists.openmama.org/listinfo/openmama-users
End of Openmama-users Digest, Vol 2, Issue 1 ********************************************
_______________________________________________ Openmama-users mailing list Openmama-users@lists.openmama.org http://lists.openmama.org/listinfo/openmama-users Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
****************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
Please consider the environment before printing this email. Visit our website at http://www.nyse.com**************************************************** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: installation with AVIS
John Gray <john.gray@...>
Apologies for resorting back again - this is probably more UNIX than mama!
I can see the make files being constructed, but the examples are still not being built - and the make seems to stop before getting to the examples directory,
At the end of the make file i get the following error: libtool: link: gcc -shared -fPIC -DPIC .libs/bridge.o .libs/clientmanageresponder.o .libs/datetime.o .libs/dictionary.o .libs/dqstrategy.o .libs/error.o .libs/fielddesc.o .libs/imagerequest.o .libs/listenermsgcallback.o .libs/log.o .libs/mama.o .libs/mamaStrUtils.o .libs/marketdata.o .libs/middleware.o .libs/msg.o .libs/msgfield.o .libs/msgqualifier.o .libs/msgstatus.o .libs/msgtype.o .libs/msgutils.o .libs/publisher.o .libs/dqpublisher.o .libs/dqpublishermanager.o .libs/inbox.o .libs/quality.o .libs/reservedfields.o .libs/senderId.o .libs/servicelevel.o .libs/queue.o .libs/io.o .libs/price.o .libs/priceimpl.o .libs/refreshtransport.o .libs/timer.o .libs/timezone.o .libs/source.o .libs/sourceman.o .libs/status.o .libs/stat.o .libs/statscollector.o .libs/statfields.o .libs/statsgenerator.o .libs/subscmsgtype.o .libs/subscription.o .libs/subscriptiontype.o .libs/statslogger.o .libs/statsloggerfields.o .libs/symbollist.o .libs/ft.o .libs/symbollistmember.o .libs/symbolmapfile.o .libs/syncresponder.o .libs/throttle.o .libs/transport.o .libs/fileutils.o .libs/playbackFileParser.o .libs/playbackpublisher.o .libs/playbackcapture.o .libs/connection.o .libs/serverconnection.o .libs/manager.o .libs/version.o -L/usr/local/lib -L./../../../../common/c_cpp/src/c -lnsl -lrt /home/john/openmama/OpenMAMA-2.1/common/c_cpp/src/c/.libs/libwombatcommon.a -ldl -luuid -O2 -Wl,-soname -Wl,libmama.so.0 -o .libs/libmama.so.0.0.0
/usr/bin/ld: cannot find -luuid collect2: ld returned 1 exit status
I have checked the libuuid file exists and have added the /lib to the LD_LIBRARY_PATH to try to get around this - but no luck.
May I beg your assistance?
Thanks j
toggle quoted messageShow quoted text
On 4 June 2012 23:00, Mike Schonberg <mschonberg@...> wrote:
John,
Based on your make logs, it looks like you don't have ant and java (Sun JDK 6) installed. I plan on changing the default build to build C/C++ only as many users do not require Java. In the mean time you can build OpenMAMA C/C++ with "make mama-install" and OpenMAMDA C/C++ with "make mamda-install". The OpenMAMDA build requires a couple of build patches that I submitted to the openmama-dev list. I will be pushing these patches to git in the next day or so.
Regards,
-Mike
> -----Original Message-----
> From: John Gray [mailto: john.gray@...]
> Sent: Saturday, June 02, 2012 6:17 AM
> To: Jacobraj Benet
> Cc: Mike Schonberg; openmama-users@...
> Subject: Re: [Openmama-users] installation with AVIS
>
> Hi
>
> Still having no luck getting the source to build to example execs and binary.
> I have attached the config logs and the output from the make pushed to a file.
>
> I used the commands:
>
> ./configure --avis-path=/usr/local --prefix=/home/john/openmama/Openmama-2.1
> make
>
> Any assistance welcome.
>
> Thanks
> John
>
>
> On 1 June 2012 20:37, Jacobraj Benet < JBenet@...> wrote:
>
>
> Hi John,
>
> The configure script in openmama accepts -avis-path instead of -with-
> avis, so you could try the following.
>
> ./configure -avis-path=/usr/local
>
> Also if you would like the openmama-2.1 to be updated, then you would
> need pass the correct location as part of the prefix
>
> So I would recommend using the following configure arguments.
>
> ./configure -avis-path=/usr/local -prefix=openmama-2.1
>
> Thanks,
> Jacob
>
>
> From: John Gray < john.gray@...>
> Date: Friday, June 1, 2012 2:10 PM
> To: Michael Schonberg < mschonberg@...>
> Cc: " openmama-users@..." <openmama-
> users@...>
>
> Subject: Re: [Openmama-users] installation with AVIS
>
>
> Hey Guys
>
> I have tried building the openmama examples - but can't get this to
> happen.
>
> The ./configure --with-avis=/usr/local comes back with unknown parameter
> --with-avis
>
> Also, the /opt/openmama files get updated from the build - but the files
> in openmama-2.1/bin and openmama-2.1/lib don't change from the original dates.
>
> Am I doing something wrong - I would like to able to edit the examples
> for running tests.
>
> thanks
> John
>
>
> On 29 May 2012 16:49, John Gray < john.gray@...> wrote:
>
>
> Hey - thats fixed it - thanks!
>
> Maybe need to add that to the mama README file. avisd is placed
> in the /usr/local/sbin folder.
> Also, was able to run publisher
>
> ./mamapublisherc -m avis -tport avis and worked fine.
>
>
> j
>
>
> On 29 May 2012 16:37, Mike Schonberg < mschonberg@...> wrote:
>
>
> avisd -v.
>
>
>
> -Mike
>
>
>
> From: John Gray [mailto: john.gray@...]
> Sent: Tuesday, May 29, 2012 8:32 AM
> To: Mike Schonberg
> Cc: openmama-users@...
>
>
> Subject: Re: [Openmama-users] installation with AVIS
>
>
>
>
>
> no - how do I start the avis daemon on the localhost?
>
> On 29 May 2012 16:10, Mike Schonberg < mschonberg@...>
> wrote:
>
> Is the avis daemon running?
>
>
>
> Regards,
>
> -Mike
>
>
>
> From:openmama-users-bounces@...
> [mailto: openmama-users-bounces@...] On Behalf Of John Gray
> Sent: Monday, May 28, 2012 12:50 PM
> To: openmama-users@...
>
>
> Subject: [Openmama-users] installation with AVIS
>
>
>
> Hello
>
>
>
> I have installed openmama and avis from the websites, but
> when trying to run mamapublisherc I get the following error....
>
>
>
> avis error code=10107, error msg=Transport endpoint is not
> connected
>
>
>
> command line:
>
> mamapublisherc -m avis -tport pub
>
>
>
> Avis tests for secure_sender and secure_receiver seem to
> work fine.
>
>
>
> What needs done to correct this?
>
>
>
> Thanks
>
> John
>
> ________________________________
>
> Please consider the environment before printing this email.
>
> Visit our website at http://www.nyse.com
>
> ************************************************************************
> *****
> Note: The information contained in this message and any
> attachment to it is privileged, confidential and protected from disclosure. If
> the reader of this message is not the intended recipient, or an employee or
> agent responsible for delivering this message to the intended recipient, you
> are hereby notified that any dissemination, distribution or copying of this
> communication is strictly prohibited. If you have received this communication
> in error, please notify the sender immediately by replying to the message, and
> please delete it from your system. Thank you. NYSE Euronext.
>
>
>
>
>
> ________________________________
>
>
>
> Please consider the environment before printing this email.
>
> Visit our website at http://www.nyse.com
>
> ************************************************************************
> *****
> Note: The information contained in this message and any
> attachment to it is privileged, confidential and protected from disclosure. If
> the reader of this message is not the intended recipient, or an employee or
> agent responsible for delivering this message to the intended recipient, you
> are hereby notified that any dissemination, distribution or copying of this
> communication is strictly prohibited. If you have received this communication
> in error, please notify the sender immediately by replying to the message, and
> please delete it from your system. Thank you. NYSE Euronext.
>
>
>
>
>
> ________________________________
>
>
>
> Please consider the environment before printing this email.
>
> Visit our website at http://www.nyse.com
> ************************************************************************
> *****
> Note: The information contained in this message and any attachment to it
> is privileged, confidential and protected from disclosure. If the reader of
> this message is not the intended recipient, or an employee or agent
> responsible for delivering this message to the intended recipient, you are
> hereby notified that any dissemination, distribution or copying of this
> communication is strictly prohibited. If you have received this communication
> in error, please notify the sender immediately by replying to the message, and
> please delete it from your system. Thank you. NYSE Euronext.
>
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
****************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
kRe: installation with AVIS
mschonberg <mschonberg@...>
On Tue, 5 Jun 2012, John Gray wrote: Apologies for resorting back again - this is probably more UNIX than mama! I can see the make files being constructed, but the examples are still not being built - and the make seems to stop before getting to the examples directory, At the end of the make file i get the following error:
libtool: link: gcc -shared -fPIC -DPIC .libs/bridge.o .libs/clientmanageresponder.o .libs/datetime.o .libs/dictionary.o .libs/dqstrategy.o .libs/error.o .libs/fielddesc.o .libs/imagerequest.o .libs/listenermsgcallback.o .libs/log.o .libs/mama.o .libs/mamaStrUtils.o .libs/marketdata.o .libs/middleware.o .libs/msg.o .libs/msgfield.o .libs/msgqualifier.o .libs/msgstatus.o .libs/msgtype.o .libs/msgutils.o .libs/publisher.o .libs/dqpublisher.o .libs/dqpublishermanager.o .libs/inbox.o .libs/quality.o .libs/reservedfields.o .libs/senderId.o .libs/servicelevel.o .libs/queue.o .libs/io.o .libs/price.o .libs/priceimpl.o .libs/refreshtransport.o .libs/timer.o .libs/timezone.o .libs/source.o .libs/sourceman.o .libs/status.o .libs/stat.o .libs/statscollector.o .libs/statfields.o .libs/statsgenerator.o .libs/subscmsgtype.o .libs/subscription.o .libs/subscriptiontype.o .libs/statslogger.o .libs/statsloggerfields.o .libs/symbollist.o .libs/ft.o .libs/symbollistmember.o .libs/symbolmapfile.o .libs/syncresponder.o .libs/throttle.o .libs/transport.o .libs/fileutils.o .libs/playbackFileParser.o .libs/playbackpublisher.o .libs/playbackcapture.o .libs/connection.o .libs/serverconnection.o .libs/manager.o .libs/version.o -L/usr/local/lib -L./../../../../common/c_cpp/src/c -lnsl -lrt /home/john/openmama/OpenMAMA-2.1/common/c_cpp/src/c/.libs/libwombatcommon.a -ldl -luuid -O2 -Wl,-soname -Wl,libmama.so.0 -o .libs/libmama.so.0.0.0
/usr/bin/ld: cannot find -luuid collect2: ld returned 1 exit status
I have checked the libuuid file exists and have added the /lib to the LD_LIBRARY_PATH to try to get around this - but no luck. On what OS are you building? Where are you finding libuuid.so? I build fine with no modifications to LD_LIBRARY_PATH on Fedora 16: /lib64/libuuid.so.1 /lib64/libuuid.so.1.3.0 /usr/lib64/libuuid.so I have the following packages installed: [mike@fedora OpenMAMA-2.1]$ yum list installed *uuid* Loaded plugins: langpacks, presto, refresh-packagekit Installed Packages libuuid.x86_64 2.20.1-2.3.fc16 @updates libuuid-devel.x86_64 2.20.1-2.3.fc16 @updates Regards, -Mike May I beg your assistance?
Thanks j
On 4 June 2012 23:00, Mike Schonberg <mschonberg@nyx.com> wrote: John,
Based on your make logs, it looks like you don't have ant and java (Sun JDK 6) installed. I plan on changing the default build to build C/C++ only as many users do not require Java. In the mean time you can build OpenMAMA C/C++ with "make mama-install" and OpenMAMDA C/C++ with "make mamda-install". The OpenMAMDA build requires a couple of build patches that I submitted to the openmama-dev list. I will be pushing these patches to git in the next day or so.
Regards, -Mike
> -----Original Message----- > From: John Gray [mailto:john.gray@neueda.com]
Sent: Saturday, June 02, 2012 6:17 AM To: Jacobraj Benet Cc: Mike Schonberg; openmama-users@lists.openmama.org Subject: Re: [Openmama-users] installation with AVIS
Hi
Still having no luck getting the source to build to example execs and binary. I have attached the config logs and the output from the make pushed to a file.
I used the commands:
./configure --avis-path=/usr/local --prefix=/home/john/openmama/Openmama-2.1 make
Any assistance welcome.
Thanks John
On 1 June 2012 20:37, Jacobraj Benet <JBenet@nyx.com> wrote:
Hi John,
The configure script in openmama accepts -avis-path instead of -with- avis, so you could try the following.
./configure -avis-path=/usr/local
Also if you would like the openmama-2.1 to be updated, then you would need pass the correct location as part of the prefix
So I would recommend using the following configure arguments.
./configure -avis-path=/usr/local -prefix=openmama-2.1
Thanks, Jacob
From: John Gray <john.gray@neueda.com> Date: Friday, June 1, 2012 2:10 PM To: Michael Schonberg <mschonberg@nyx.com> Cc: "openmama-users@lists.openmama.org" <openmama- users@lists.openmama.org>
Subject: Re: [Openmama-users] installation with AVIS
Hey Guys
I have tried building the openmama examples - but can't get this to happen.
The ./configure --with-avis=/usr/local comes back with unknown parameter --with-avis
Also, the /opt/openmama files get updated from the build - but the files in openmama-2.1/bin and openmama-2.1/lib don't change from the original dates.
Am I doing something wrong - I would like to able to edit the examples for running tests.
thanks John
On 29 May 2012 16:49, John Gray <john.gray@neueda.com> wrote:
Hey - thats fixed it - thanks!
Maybe need to add that to the mama README file. avisd is placed in the /usr/local/sbin folder. Also, was able to run publisher
./mamapublisherc -m avis -tport avis and worked fine.
j
On 29 May 2012 16:37, Mike Schonberg <mschonberg@nyx.com> wrote:
avisd -v.
-Mike
From: John Gray [mailto:john.gray@neueda.com] Sent: Tuesday, May 29, 2012 8:32 AM To: Mike Schonberg Cc: openmama-users@lists.openmama.org
Subject: Re: [Openmama-users] installation with AVIS
no - how do I start the avis daemon on the localhost?
On 29 May 2012 16:10, Mike Schonberg <mschonberg@nyx.com> wrote:
Is the avis daemon running?
Regards,
-Mike
From:openmama-users-bounces@lists.openmama.org [mailto:openmama-users-bounces@lists.openmama.org] On Behalf Of John Gray Sent: Monday, May 28, 2012 12:50 PM To: openmama-users@lists.openmama.org
Subject: [Openmama-users] installation with AVIS
Hello
I have installed openmama and avis from the websites, but when trying to run mamapublisherc I get the following error....
avis error code=10107, error msg=Transport endpoint is not connected
command line:
mamapublisherc -m avis -tport pub
Avis tests for secure_sender and secure_receiver seem to work fine.
What needs done to correct this?
Thanks
John
________________________________
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
************************************************************************ ***** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
________________________________
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
************************************************************************ ***** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
________________________________
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com ************************************************************************ ***** Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
****************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
Re: kRe: installation with AVIS
John Gray <john.gray@...>
Getting there - added a symlink to /usr/lib64 for libuuid.so and that got me further...
However, getting some undefined references:
libtool: link: g++ -g -O2 -rdynamic -o .libs/comboticker comboticker.o parsecmd.o dictrequester.o -L/opt/openmama/lib -L./../cpp -L./../cpp/mamda -L./../cpp/options -L./../../../../mama/c_cpp/src/c -L./../../../../mama/c_cpp/src/cpp /opt/openmama/lib/libwombatcommon.a /home/john/openmama/OpenMAMA-2.1/mamda/c_cpp/src/cpp/.libs/libmamda.so /home/john/openmama/OpenMAMA-2.1/lib/libmamacpp.so -L/usr/local/lib -L./../c /home/john/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so -L./../../../../common/c_cpp/src/c -lrt -luuid -lpthread -ldl -lnsl -lm -Wl,-rpath -Wl,/home/john/openmama/OpenMAMA-2.1/lib
/home/john/openmama/OpenMAMA-2.1/lib/libmamacpp.so: undefined reference to `std::__detail::_List_node_base::_M_unhook()@GLIBCXX_3.4.15' /home/john/openmama/OpenMAMA-2.1/lib/libmamacpp.so: undefined reference to `std::__detail::_List_node_base::_M_hook(std::__detail::_List_node_base*)@GLIBCXX_3.4.15'
Im using Ubuntu:
Linux john-laptop 2.6.32-41-generic #89-Ubuntu SMP Fri Apr 27 22:18:56 UTC 2012 x86_64 GNU/Lin
Thanks again for your help in this. j
toggle quoted messageShow quoted text
On 5 June 2012 20:03, mschonberg <mschonberg@...> wrote:
On Tue, 5 Jun 2012, John Gray wrote:
> Apologies for resorting back again - this is probably more UNIX than mama!
> I can see the make files being constructed, but the examples are still not being built - and the make seems to stop before getting to the examples directory,
> At the end of the make file i get the following error:
>
> libtool: link: gcc -shared -fPIC -DPIC .libs/bridge.o .libs/clientmanageresponder.o .libs/datetime.o .libs/dictionary.o .libs/dqstrategy.o .libs/error.o .libs/fielddesc.o .libs/imagerequest.o
> .libs/listenermsgcallback.o .libs/log.o .libs/mama.o .libs/mamaStrUtils.o .libs/marketdata.o .libs/middleware.o .libs/msg.o .libs/msgfield.o .libs/msgqualifier.o .libs/msgstatus.o .libs/msgtype.o
> .libs/msgutils.o .libs/publisher.o .libs/dqpublisher.o .libs/dqpublishermanager.o .libs/inbox.o .libs/quality.o .libs/reservedfields.o .libs/senderId.o .libs/servicelevel.o .libs/queue.o .libs/io.o
> .libs/price.o .libs/priceimpl.o .libs/refreshtransport.o .libs/timer.o .libs/timezone.o .libs/source.o .libs/sourceman.o .libs/status.o .libs/stat.o .libs/statscollector.o .libs/statfields.o
> .libs/statsgenerator.o .libs/subscmsgtype.o .libs/subscription.o .libs/subscriptiontype.o .libs/statslogger.o .libs/statsloggerfields.o .libs/symbollist.o .libs/ft.o .libs/symbollistmember.o
> .libs/symbolmapfile.o .libs/syncresponder.o .libs/throttle.o .libs/transport.o .libs/fileutils.o .libs/playbackFileParser.o .libs/playbackpublisher.o .libs/playbackcapture.o .libs/connection.o
> .libs/serverconnection.o .libs/manager.o .libs/version.o -L/usr/local/lib -L./../../../../common/c_cpp/src/c -lnsl -lrt /home/john/openmama/OpenMAMA-2.1/common/c_cpp/src/c/.libs/libwombatcommon.a -ldl
> -luuid -O2 -Wl,-soname -Wl,libmama.so.0 -o .libs/libmama.so.0.0.0
>
> /usr/bin/ld: cannot find -luuid
> collect2: ld returned 1 exit status
>
> I have checked the libuuid file exists and have added the /lib to the LD_LIBRARY_PATH to try to get around this - but no luck.
On what OS are you building? Where are you finding libuuid.so?
I build fine with no modifications to LD_LIBRARY_PATH on Fedora 16:
/lib64/libuuid.so.1
/lib64/libuuid.so.1.3.0
/usr/lib64/libuuid.so
I have the following packages installed:
[mike@fedora OpenMAMA-2.1]$ yum list installed *uuid*
Loaded plugins: langpacks, presto, refresh-packagekit
Installed Packages
libuuid.x86_64 2.20.1-2.3.fc16 @updates
libuuid-devel.x86_64 2.20.1-2.3.fc16 @updates
Regards,
-Mike
>
> May I beg your assistance?
>
> Thanks
> j
>
> On 4 June 2012 23:00, Mike Schonberg <mschonberg@...> wrote:
> John,
>
> Based on your make logs, it looks like you don't have ant and java (Sun JDK 6) installed. I plan on changing the default build to build C/C++ only as many users do not require Java. In the mean
> time you can build OpenMAMA C/C++ with "make mama-install" and OpenMAMDA C/C++ with "make mamda-install". The OpenMAMDA build requires a couple of build patches that I submitted to the
> openmama-dev list. I will be pushing these patches to git in the next day or so.
>
> Regards,
> -Mike
>
> > -----Original Message-----
> > From: John Gray [mailto:john.gray@...]
> > Sent: Saturday, June 02, 2012 6:17 AM
> > To: Jacobraj Benet
> > Cc: Mike Schonberg; openmama-users@...
> > Subject: Re: [Openmama-users] installation with AVIS
> >
> > Hi
> >
> > Still having no luck getting the source to build to example execs and binary.
> > I have attached the config logs and the output from the make pushed to a file.
> >
> > I used the commands:
> >
> > ./configure --avis-path=/usr/local --prefix=/home/john/openmama/Openmama-2.1
> > make
> >
> > Any assistance welcome.
> >
> > Thanks
> > John
> >
> >
> > On 1 June 2012 20:37, Jacobraj Benet <JBenet@...> wrote:
> >
> >
> > Hi John,
> >
> > The configure script in openmama accepts -avis-path instead of -with-
> > avis, so you could try the following.
> >
> > ./configure -avis-path=/usr/local
> >
> > Also if you would like the openmama-2.1 to be updated, then you would
> > need pass the correct location as part of the prefix
> >
> > So I would recommend using the following configure arguments.
> >
> > ./configure -avis-path=/usr/local -prefix=openmama-2.1
> >
> > Thanks,
> > Jacob
> >
> >
> > From: John Gray <john.gray@...>
> > Date: Friday, June 1, 2012 2:10 PM
> > To: Michael Schonberg <mschonberg@...>
> > Cc: "openmama-users@..." <openmama-
> > users@...>
> >
> > Subject: Re: [Openmama-users] installation with AVIS
> >
> >
> > Hey Guys
> >
> > I have tried building the openmama examples - but can't get this to
> > happen.
> >
> > The ./configure --with-avis=/usr/local comes back with unknown parameter
> > --with-avis
> >
> > Also, the /opt/openmama files get updated from the build - but the files
> > in openmama-2.1/bin and openmama-2.1/lib don't change from the original dates.
> >
> > Am I doing something wrong - I would like to able to edit the examples
> > for running tests.
> >
> > thanks
> > John
> >
> >
> > On 29 May 2012 16:49, John Gray <john.gray@...> wrote:
> >
> >
> > Hey - thats fixed it - thanks!
> >
> > Maybe need to add that to the mama README file. avisd is placed
> > in the /usr/local/sbin folder.
> > Also, was able to run publisher
> >
> > ./mamapublisherc -m avis -tport avis and worked fine.
> >
> >
> > j
> >
> >
> > On 29 May 2012 16:37, Mike Schonberg <mschonberg@...> wrote:
> >
> >
> > avisd -v.
> >
> >
> >
> > -Mike
> >
> >
> >
> > From: John Gray [mailto:john.gray@...]
> > Sent: Tuesday, May 29, 2012 8:32 AM
> > To: Mike Schonberg
> > Cc: openmama-users@...
> >
> >
> > Subject: Re: [Openmama-users] installation with AVIS
> >
> >
> >
> >
> >
> > no - how do I start the avis daemon on the localhost?
> >
> > On 29 May 2012 16:10, Mike Schonberg <mschonberg@...>
> > wrote:
> >
> > Is the avis daemon running?
> >
> >
> >
> > Regards,
> >
> > -Mike
> >
> >
> >
> > From:openmama-users-bounces@...
> > [mailto:openmama-users-bounces@...] On Behalf Of John Gray
> > Sent: Monday, May 28, 2012 12:50 PM
> > To: openmama-users@...
> >
> >
> > Subject: [Openmama-users] installation with AVIS
> >
> >
> >
> > Hello
> >
> >
> >
> > I have installed openmama and avis from the websites, but
> > when trying to run mamapublisherc I get the following error....
> >
> >
> >
> > avis error code=10107, error msg=Transport endpoint is not
> > connected
> >
> >
> >
> > command line:
> >
> > mamapublisherc -m avis -tport pub
> >
> >
> >
> > Avis tests for secure_sender and secure_receiver seem to
> > work fine.
> >
> >
> >
> > What needs done to correct this?
> >
> >
> >
> > Thanks
> >
> > John
> >
> > ________________________________
> >
> > Please consider the environment before printing this email.
> >
> > Visit our website at http://www.nyse.com
> >
> > ************************************************************************
> > *****
> > Note: The information contained in this message and any
> > attachment to it is privileged, confidential and protected from disclosure. If
> > the reader of this message is not the intended recipient, or an employee or
> > agent responsible for delivering this message to the intended recipient, you
> > are hereby notified that any dissemination, distribution or copying of this
> > communication is strictly prohibited. If you have received this communication
> > in error, please notify the sender immediately by replying to the message, and
> > please delete it from your system. Thank you. NYSE Euronext.
> >
> >
> >
> >
> >
> > ________________________________
> >
> >
> >
> > Please consider the environment before printing this email.
> >
> > Visit our website at http://www.nyse.com
> >
> > ************************************************************************
> > *****
> > Note: The information contained in this message and any
> > attachment to it is privileged, confidential and protected from disclosure. If
> > the reader of this message is not the intended recipient, or an employee or
> > agent responsible for delivering this message to the intended recipient, you
> > are hereby notified that any dissemination, distribution or copying of this
> > communication is strictly prohibited. If you have received this communication
> > in error, please notify the sender immediately by replying to the message, and
> > please delete it from your system. Thank you. NYSE Euronext.
> >
> >
> >
> >
> >
> > ________________________________
> >
> >
> >
> > Please consider the environment before printing this email.
> >
> > Visit our website at http://www.nyse.com
> > ************************************************************************
> > *****
> > Note: The information contained in this message and any attachment to it
> > is privileged, confidential and protected from disclosure. If the reader of
> > this message is not the intended recipient, or an employee or agent
> > responsible for delivering this message to the intended recipient, you are
> > hereby notified that any dissemination, distribution or copying of this
> > communication is strictly prohibited. If you have received this communication
> > in error, please notify the sender immediately by replying to the message, and
> > please delete it from your system. Thank you. NYSE Euronext.
> >
>
> Please consider the environment before printing this email.
>
> Visit our website at http://www.nyse.com
>
> ****************************************************
>
> Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an
> employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly
> prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
>
>
>
>
|
|
Re: installation with AVIS
mschonberg <mschonberg@...>
On Tue, 5 Jun 2012, John Gray wrote: Getting there - added a symlink to /usr/lib64 for libuuid.so and that got me further...
However, getting some undefined references:
libtool: link: g++ -g -O2 -rdynamic -o .libs/comboticker comboticker.o parsecmd.o dictrequester.o -L/opt/openmama/lib -L./../cpp -L./../cpp/mamda -L./../cpp/options -L./../../../../mama/c_cpp/src/c -L./../../../../mama/c_cpp/src/cpp /opt/openmama/lib/libwombatcommon.a /home/john/openmama/OpenMAMA-2.1/mamda/c_cpp/src/cpp/.libs/libmamda.so /home/john/openmama/OpenMAMA-2.1/lib/libmamacpp.so -L/usr/local/lib -L./../c /home/john/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so -L./../../../../common/c_cpp/src/c -lrt -luuid -lpthread -ldl -lnsl -lm -Wl,-rpath -Wl,/home/john/openmama/OpenMAMA-2.1/lib /home/john/openmama/OpenMAMA-2.1/lib/libmamacpp.so: undefined reference to `std::__detail::_List_node_base::_M_unhook()@GLIBCXX_3.4.15' /home/john/openmama/OpenMAMA-2.1/lib/libmamacpp.so: undefined reference to `std::__detail::_List_node_base::_M_hook(std::__detail::_List_node_base*)@GLIBCXX_3.4.15'
Do you have libstdc++ installed? You can check in the synaptic package manager. Regards, -Mike Im using Ubuntu:
Linux john-laptop 2.6.32-41-generic #89-Ubuntu SMP Fri Apr 27 22:18:56 UTC 2012 x86_64 GNU/Lin
Thanks again for your help in this. j
On 5 June 2012 20:03, mschonberg <mschonberg@nyx.com> wrote:
On Tue, 5 Jun 2012, John Gray wrote:
> Apologies for resorting back again - this is probably more UNIX than mama! > I can see the make files being constructed, but the examples are still not being built - and the make seems to stop before getting to the examples directory, > At the end of the make file i get the following error: > > libtool: link: gcc -shared -fPIC -DPIC .libs/bridge.o .libs/clientmanageresponder.o .libs/datetime.o .libs/dictionary.o .libs/dqstrategy.o .libs/error.o .libs/fielddesc.o .libs/imagerequest.o > .libs/listenermsgcallback.o .libs/log.o .libs/mama.o .libs/mamaStrUtils.o .libs/marketdata.o .libs/middleware.o .libs/msg.o .libs/msgfield.o .libs/msgqualifier.o .libs/msgstatus.o .libs/msgtype.o > .libs/msgutils.o .libs/publisher.o .libs/dqpublisher.o .libs/dqpublishermanager.o .libs/inbox.o .libs/quality.o .libs/reservedfields.o .libs/senderId.o .libs/servicelevel.o .libs/queue.o .libs/io.o > .libs/price.o .libs/priceimpl.o .libs/refreshtransport.o .libs/timer.o .libs/timezone.o .libs/source.o .libs/sourceman.o .libs/status.o .libs/stat.o .libs/statscollector.o .libs/statfields.o > .libs/statsgenerator.o .libs/subscmsgtype.o .libs/subscription.o .libs/subscriptiontype.o .libs/statslogger.o .libs/statsloggerfields.o .libs/symbollist.o .libs/ft.o .libs/symbollistmember.o > .libs/symbolmapfile.o .libs/syncresponder.o .libs/throttle.o .libs/transport.o .libs/fileutils.o .libs/playbackFileParser.o .libs/playbackpublisher.o .libs/playbackcapture.o .libs/connection.o > .libs/serverconnection.o .libs/manager.o .libs/version.o -L/usr/local/lib -L./../../../../common/c_cpp/src/c -lnsl -lrt /home/john/openmama/OpenMAMA-2.1/common/c_cpp/src/c/.libs/libwombatcommon.a -ldl > -luuid -O2 -Wl,-soname -Wl,libmama.so.0 -o .libs/libmama.so.0.0.0 > > /usr/bin/ld: cannot find -luuid > collect2: ld returned 1 exit status > > I have checked the libuuid file exists and have added the /lib to the LD_LIBRARY_PATH to try to get around this - but no luck.
On what OS are you building? Where are you finding libuuid.so?
I build fine with no modifications to LD_LIBRARY_PATH on Fedora 16: /lib64/libuuid.so.1 /lib64/libuuid.so.1.3.0 /usr/lib64/libuuid.so
I have the following packages installed: [mike@fedora OpenMAMA-2.1]$ yum list installed *uuid* Loaded plugins: langpacks, presto, refresh-packagekit Installed Packages libuuid.x86_64 2.20.1-2.3.fc16 @updates libuuid-devel.x86_64 2.20.1-2.3.fc16 @updates
Regards, -Mike
> > May I beg your assistance? > > Thanks > j > > On 4 June 2012 23:00, Mike Schonberg <mschonberg@nyx.com> wrote: > John, > > Based on your make logs, it looks like you don't have ant and java (Sun JDK 6) installed. I plan on changing the default build to build C/C++ only as many users do not require Java. In the mean > time you can build OpenMAMA C/C++ with "make mama-install" and OpenMAMDA C/C++ with "make mamda-install". The OpenMAMDA build requires a couple of build patches that I submitted to the > openmama-dev list. I will be pushing these patches to git in the next day or so. > > Regards, > -Mike > > > -----Original Message----- > > From: John Gray [mailto:john.gray@neueda.com] > > Sent: Saturday, June 02, 2012 6:17 AM > > To: Jacobraj Benet > > Cc: Mike Schonberg; openmama-users@lists.openmama.org > > Subject: Re: [Openmama-users] installation with AVIS > > > > Hi > > > > Still having no luck getting the source to build to example execs and binary. > > I have attached the config logs and the output from the make pushed to a file. > > > > I used the commands: > > > > ./configure --avis-path=/usr/local --prefix=/home/john/openmama/Openmama-2.1 > > make > > > > Any assistance welcome. > > > > Thanks > > John > > > > > > On 1 June 2012 20:37, Jacobraj Benet <JBenet@nyx.com> wrote: > > > > > > Hi John, > > > > The configure script in openmama accepts -avis-path instead of -with- > > avis, so you could try the following. > > > > ./configure -avis-path=/usr/local > > > > Also if you would like the openmama-2.1 to be updated, then you would > > need pass the correct location as part of the prefix > > > > So I would recommend using the following configure arguments. > > > > ./configure -avis-path=/usr/local -prefix=openmama-2.1 > > > > Thanks, > > Jacob > > > > > > From: John Gray <john.gray@neueda.com> > > Date: Friday, June 1, 2012 2:10 PM > > To: Michael Schonberg <mschonberg@nyx.com> > > Cc: "openmama-users@lists.openmama.org" <openmama- > > users@lists.openmama.org> > > > > Subject: Re: [Openmama-users] installation with AVIS > > > > > > Hey Guys > > > > I have tried building the openmama examples - but can't get this to > > happen. > > > > The ./configure --with-avis=/usr/local comes back with unknown parameter > > --with-avis > > > > Also, the /opt/openmama files get updated from the build - but the files > > in openmama-2.1/bin and openmama-2.1/lib don't change from the original dates. > > > > Am I doing something wrong - I would like to able to edit the examples > > for running tests. > > > > thanks > > John > > > > > > On 29 May 2012 16:49, John Gray <john.gray@neueda.com> wrote: > > > > > > Hey - thats fixed it - thanks! > > > > Maybe need to add that to the mama README file. avisd is placed > > in the /usr/local/sbin folder. > > Also, was able to run publisher > > > > ./mamapublisherc -m avis -tport avis and worked fine. > > > > > > j > > > > > > On 29 May 2012 16:37, Mike Schonberg <mschonberg@nyx.com> wrote: > > > > > > avisd -v. > > > > > > > > -Mike > > > > > > > > From: John Gray [mailto:john.gray@neueda.com] > > Sent: Tuesday, May 29, 2012 8:32 AM > > To: Mike Schonberg > > Cc: openmama-users@lists.openmama.org > > > > > > Subject: Re: [Openmama-users] installation with AVIS > > > > > > > > > > > > no - how do I start the avis daemon on the localhost? > > > > On 29 May 2012 16:10, Mike Schonberg <mschonberg@nyx.com> > > wrote: > > > > Is the avis daemon running? > > > > > > > > Regards, > > > > -Mike > > > > > > > > From:openmama-users-bounces@lists.openmama.org > > [mailto:openmama-users-bounces@lists.openmama.org] On Behalf Of John Gray > > Sent: Monday, May 28, 2012 12:50 PM > > To: openmama-users@lists.openmama.org > > > > > > Subject: [Openmama-users] installation with AVIS > > > > > > > > Hello > > > > > > > > I have installed openmama and avis from the websites, but > > when trying to run mamapublisherc I get the following error.... > > > > > > > > avis error code=10107, error msg=Transport endpoint is not > > connected > > > > > > > > command line: > > > > mamapublisherc -m avis -tport pub > > > > > > > > Avis tests for secure_sender and secure_receiver seem to > > work fine. > > > > > > > > What needs done to correct this? > > > > > > > > Thanks > > > > John > > > > ________________________________ > > > > Please consider the environment before printing this email. > > > > Visit our website at http://www.nyse.com > > > > ************************************************************************ > > ***** > > Note: The information contained in this message and any > > attachment to it is privileged, confidential and protected from disclosure. If > > the reader of this message is not the intended recipient, or an employee or > > agent responsible for delivering this message to the intended recipient, you > > are hereby notified that any dissemination, distribution or copying of this > > communication is strictly prohibited. If you have received this communication > > in error, please notify the sender immediately by replying to the message, and > > please delete it from your system. Thank you. NYSE Euronext. > > > > > > > > > > > > ________________________________ > > > > > > > > Please consider the environment before printing this email. > > > > Visit our website at http://www.nyse.com > > > > ************************************************************************ > > ***** > > Note: The information contained in this message and any > > attachment to it is privileged, confidential and protected from disclosure. If > > the reader of this message is not the intended recipient, or an employee or > > agent responsible for delivering this message to the intended recipient, you > > are hereby notified that any dissemination, distribution or copying of this > > communication is strictly prohibited. If you have received this communication > > in error, please notify the sender immediately by replying to the message, and > > please delete it from your system. Thank you. NYSE Euronext. > > > > > > > > > > > > ________________________________ > > > > > > > > Please consider the environment before printing this email. > > > > Visit our website at http://www.nyse.com > > ************************************************************************ > > ***** > > Note: The information contained in this message and any attachment to it > > is privileged, confidential and protected from disclosure. If the reader of > > this message is not the intended recipient, or an employee or agent > > responsible for delivering this message to the intended recipient, you are > > hereby notified that any dissemination, distribution or copying of this > > communication is strictly prohibited. If you have received this communication > > in error, please notify the sender immediately by replying to the message, and > > please delete it from your system. Thank you. NYSE Euronext. > > > > Please consider the environment before printing this email. > > Visit our website at http://www.nyse.com > > **************************************************** > > Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an > employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly > prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext. > > > >
|
|
Jacobraj Benet <JBenet@...>
The wmw middleware should be build in the API and Feedhandler, you should be fine with demo kit.
Jacob
From: John Gray < john.gray@...>
Date: Friday, June 8, 2012 11:26 AM
To: Jacobraj Benet < jbenet@...>
Subject: Re: CTA demo
I thought that might be the case. Is there a demo of wmw to go with this? Needs to be correct version I guess. Or is there anything else I can use?
On 8 June 2012 15:27, Jacobraj Benet <JBenet@...> wrote:
The CTA_demo package cannot be ran with avis middleware, you would need to use the wmw tcp middleware.
Jacob
From: John Gray < john.gray@...>
Date: Friday, June 8, 2012 6:24 AM
To: Jacobraj Benet < jbenet@...>
Subject: CTA demo
Hi Jacob
I can get the feed to run fine and the APIs look ok too - but can't get the two to connect (timeout waiting for dictionary) when running mamalistenc.
I have AVIS - but not wmw or lbm - is there any settings on the feed start command - or on the mama.properties I need to alter?
Thanks
J
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message
to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message,
and please delete it from your system. Thank you. NYSE Euronext.
Please consider the environment before printing this email.
Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.
|
|
OpenMAMA-2.1.1.2 and New Branches
Michael Schonberg <mschonberg@...>
I pushed a number of changes to the git repository this week, and created two new branches.
The new branches are "next" and OpenMama-2.1.1. The next branch contains all the patches submitted to the mailing list that are under consideration for the next scheduled release, OpenMAMA-2.1.2. This includes all of the patches submitted to openmama-dev thus far. The OpenMAMA-2.1.1 branch is the current stable branch starting from the April 29 2.1.1.1 release which is tagged with OpenMAMA-2.1.1.1. Only critical bug fixes and very low impact changes will be merged into the stable branches. All changes to the stable branches must be first committed to master.
I will be posting additional details on the development cycle and how changes get into the next, master and stable branches to the web site and openmama-dev in the coming days.
The changes for 2.1.1.2 are described below. The source and binaries are not available on the web site yet as there are some issues uploading files at the moment. I expect to have this resolved shortly.
Regards, -Michael Schonberg <mschonberg@nyx.com>
CHANGES: OpenMAMA 2.1.1.2
This release contains very minor fixes focusing on the build environment. The 2.1.1.1 release, which introduced OpenMAMDA in addition to C++ and Java support, complicated the build environment significantly. These changes address some of the build issues encountered. Subsequent minor releases will attempt to further simplify the build process.
Changes:
Add patch for -lmama for news and orderbook examples
The news and orderbook examples were not building because the linker could not find libmama. This patch adjusts the link flags to include the path to the mama c libraries.
Signed-off-by: Mike Schonberg <mschonberg@nyx.com>
Add libpthread to library list for sem_timedwait
configure.ac needs to search for sem_timedwait in both librt and libpthread. On OS's like certain Solaris versions that do not support sem_timedwait(), OpenMAMA provides an implentation.
Signed-off-by: Mike Schonberg <mschonberg@nyx.com>
Updated Build Instructions
Added better download and build instructions for the Avis client and router.
For the OpenMAMA build it is necessary to specify --with-avis to build the Avis bridge, and it is also necessary to invoke generateBuildFiles.sh prior to building source from a cloned git repository.
Signed-off-by: Mike Schonberg <mschonberg@nyx.com>
[mama] Adding .gitignore
This patch introduces a .gitignore file to force git to skip known build artifacts when displaying status information.
Signed-off-by: Mark Spielman <mark.spielman@solacesystems.com>
|
|