Date   

mamaMsg_createForWombatMsg

Nicolas Huyghe
 

Hello,

 

I cannot find the function mamaMsg_createForWombatMsg which is described in section 11.2 of the developer’s guide (example 62).

Could you tell me where to find it?

 

Thank you,

 

-Nicolas Huyghe


Re: Openmama-users Digest, Vol 7, Issue 4

kulbhushan chaskar <kulbhushanchaskar@...>
 

Hi,
    I think accept is also work when avis middle ware u used
 
Regards,
Kulbhushan Chaskar.

On Thu, Oct 18, 2012 at 5:30 PM, <openmama-users-request@...> wrote:
Send Openmama-users mailing list submissions to
        openmama-users@...

To subscribe or unsubscribe via the World Wide Web, visit
        https://lists.openmama.org/mailman/listinfo/openmama-users
or, via email, send a message with subject or body 'help' to
        openmama-users-request@...

You can reach the person managing the list at
        openmama-users-owner@...

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Openmama-users digest..."


Today's Topics:

   1. Re: Transport Listener issue (Ian Bell)


----------------------------------------------------------------------

Message: 1
Date: Wed, 17 Oct 2012 19:30:04 +0000
From: Ian Bell <IBell@...>
To: Nicolas Huyghe <Nicolas.Huyghe@...>,
        "openmama-users@..."
        <openmama-users@...>
Subject: Re: [Openmama-users] Transport Listener issue
Message-ID:
        <4657D669CDDCE045A4E14365D61F462D061E8D@...>
Content-Type: text/plain; charset="us-ascii"

Hi

There are a number of transport callback events available through OpenMAMA but not all middlewares support them all.

        MAMA_TRANSPORT_CONNECT
        MAMA_TRANSPORT_CONNECT_FAILED
        MAMA_TRANSPORT_RECONNECT
        MAMA_TRANSPORT_DISCONNECT
        MAMA_TRANSPORT_ACCEPT
        MAMA_TRANSPORT_ACCEPT_RECONNECT
        MAMA_TRANSPORT_PUBLISHER_DISCONNECT
        MAMA_TRANSPORT_QUALITY
        MAMA_TRANSPORT_NAMING_SERVICE_CONNECT
        MAMA_TRANSPORT_NAMING_SERVICE_DISCONNECT
        MAMA_TRANSPORT_WRITE_QUEUE_HIGH_WATER_MARK
        MAMA_TRANSPORT_WRITE_QUEUE_LOW_WATER_MARK

The only one connected up in avis is disconnect.

When an event like this happens at the middleware layer, it is propagated into the middleware bridge which can then call
one of the following OpenMAMA transport functions which will give the transport callback to the application,


mamaTransportImpl_invokeTransportCallback
mamaTransportImpl_disconnect
mamaTransportImpl_reconnect

If the middleware supports the events and the bridge implementation handles it correctly then you should get transport callbacks for CONNECT.

Thanks,
Ian

From: openmama-users-bounces@... [mailto:openmama-users-bounces@...] On Behalf Of Nicolas Huyghe
Sent: 17 October 2012 09:09
To: openmama-users@...
Subject: [Openmama-users] Transport Listener issue

Hi everyone,

When using avis middleware, the transport listener does not receive any connection events except for disconnect when I shutdown the avis router.
Is that feature not supported with avis? Will other middlewares such as tibco notify the transport listener on successful connection (CONNECT event) ?

Thanks


________________________________

Please consider the environment before printing this e-mail.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error, please advise the sender immediately by reply e-mail and delete this message and any attachments without retaining a copy.

Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openmama.org/pipermail/openmama-users/attachments/20121017/76cc1884/attachment-0001.html>

------------------------------

_______________________________________________
Openmama-users mailing list
Openmama-users@...
https://lists.openmama.org/mailman/listinfo/openmama-users


End of Openmama-users Digest, Vol 7, Issue 4
********************************************


Re: Transport Listener issue

Ian Bell <IBell@...>
 

Hi

 

There are a number of transport callback events available through OpenMAMA but not all middlewares support them all.

 

        MAMA_TRANSPORT_CONNECT

        MAMA_TRANSPORT_CONNECT_FAILED

        MAMA_TRANSPORT_RECONNECT

        MAMA_TRANSPORT_DISCONNECT

        MAMA_TRANSPORT_ACCEPT

        MAMA_TRANSPORT_ACCEPT_RECONNECT     

        MAMA_TRANSPORT_PUBLISHER_DISCONNECT

        MAMA_TRANSPORT_QUALITY

        MAMA_TRANSPORT_NAMING_SERVICE_CONNECT

        MAMA_TRANSPORT_NAMING_SERVICE_DISCONNECT

        MAMA_TRANSPORT_WRITE_QUEUE_HIGH_WATER_MARK

        MAMA_TRANSPORT_WRITE_QUEUE_LOW_WATER_MARK

 

The only one connected up in avis is disconnect.

 

When an event like this happens at the middleware layer, it is propagated into the middleware bridge which can then call

one of the following OpenMAMA transport functions which will give the transport callback to the application,

 

 

mamaTransportImpl_invokeTransportCallback

mamaTransportImpl_disconnect

mamaTransportImpl_reconnect

 

If the middleware supports the events and the bridge implementation handles it correctly then you should get transport callbacks for CONNECT.

 

Thanks,

Ian

 

From: openmama-users-bounces@... [mailto:openmama-users-bounces@...] On Behalf Of Nicolas Huyghe
Sent: 17 October 2012 09:09
To: openmama-users@...
Subject: [Openmama-users] Transport Listener issue

 

Hi everyone,

 

When using avis middleware, the transport listener does not receive any connection events except for disconnect when I shutdown the avis router.

Is that feature not supported with avis? Will other middlewares such as tibco notify the transport listener on successful connection (CONNECT event) ?

 

Thanks

 




Please consider the environment before printing this e-mail.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error, please advise the sender immediately by reply e-mail and delete this message and any attachments without retaining a copy.

Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.


Transport Listener issue

Nicolas Huyghe
 

Hi everyone,

 

When using avis middleware, the transport listener does not receive any connection events except for disconnect when I shutdown the avis router.

Is that feature not supported with avis? Will other middlewares such as tibco notify the transport listener on successful connection (CONNECT event) ?

 

Thanks

 


Re: dictionary publisher and avis

Ian Bell <IBell@...>
 

Hi

 

Currently avis can’t support the dictionary as the point of the dictionary is to relate fids to names and the avis payload can’t have both.

 

A way to fix this may be to modify the avis bridge so that the name and fid could be passed in a field

 

Ie currently the id string is a fid or a name we could change the id string for the field to contain the name and fid separated by a

particular character if you wan to send both.

 

If the character is not present that it could fall back to looking for a fir or a name.

 

Eg

699_wPriceLevels

 

Ian

 

 

From: openmama-users-bounces@... [mailto:openmama-users-bounces@...] On Behalf Of Nicolas Huyghe
Sent: 12 October 2012 16:40
To: openmama-users@...
Subject: [Openmama-users] dictionary publisher and avis

 

Hello

 

I am trying to publish a dictionary over avis. The sample listener (written in C) crashes on reception of the dictionary message (during iteration on the fields of the dictionary message).

 

Can you actually publish/subscribe a dictionary over avis? I also noticed that fields in avis message cannot have a fid and a name at the same time.

 

Thank you

 




Please consider the environment before printing this e-mail.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error, please advise the sender immediately by reply e-mail and delete this message and any attachments without retaining a copy.

Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.


dictionary publisher and avis

Nicolas Huyghe
 

Hello

 

I am trying to publish a dictionary over avis. The sample listener (written in C) crashes on reception of the dictionary message (during iteration on the fields of the dictionary message).

 

Can you actually publish/subscribe a dictionary over avis? I also noticed that fields in avis message cannot have a fid and a name at the same time.

 

Thank you

 


Re: Announcing the Tick42 Blp Bridge for OpenMama (with attached documents this time)

Tom Doust
 

 

 

From: Tom Doust
Sent: 27 September 2012 12:44 PM
To: Openmama-dev@...; 'openmama-users@...'
Subject: Announcing the Tick42 Blp Bridge for OpenMama

 

 

We are pleased to announce version 1.0 of the Tick42 blp bridge which uses the Bloomberg Open API. This provides OpenMama access to Bloomberg data from Bloomberg Terminal, Server API and Managed B-Pipe data sources.

 

The source code is released under the “GNU Lesser General Public License”

 

I am currently in the process of figuring out how to get the source code into the OpenMama git. In the meantime, a binary release of the bridge is available for download on the tick42 website. Please contact blpBridge@... for details.

 

The attached documents provide an overview of the bridge (Tick42 BLP Bridge for Open Mama.pdf) and a description of how to build the source code (Tick42 BLP Bridge Development environment.pdf)

 

Best regards

 

Tom Doust

 

TOM DOUST | Head of Consultancy                                                                                                         


TICK42

P: +44 (0) 1628 477444 | M: +44 (0) 7710 479924 | E: tom.doust@... | http://www.tick42.com  


 

 


Announcing the Tick42 Blp Bridge for OpenMama

Tom Doust
 

 

We are pleased to announce version 1.0 of the Tick42 blp bridge which uses the Bloomberg Open API. This provides OpenMama access to Bloomberg data from Bloomberg Terminal, Server API and Managed B-Pipe data sources.

 

The source code is released under the “GNU Lesser General Public License”

 

I am currently in the process of figuring out how to get the source code into the OpenMama git. In the meantime, a binary release of the bridge is available for download on the tick42 website. Please contact blpBridge@... for details.

 

The attached documents provide an overview of the bridge (Tick42 BLP Bridge for Open Mama.pdf) and a description of how to build the source code (Tick42 BLP Bridge Development environment.pdf)

 

Best regards

 

Tom Doust

 

TOM DOUST | Head of Consultancy                                                                                                         


TICK42

P: +44 (0) 1628 477444 | M: +44 (0) 7710 479924 | E: tom.doust@... | http://www.tick42.com  


 

 


Re: Handling stale messages

Glenn McClements <gmcclements@...>
 

Hi Nicolas,
The main difference is that MAMA_QUALITY_STALE is a property of a mamaSubscription object, while MAMA_MSG_STATUS_STALE is a property of the mamaMsg object - you will receive stale messages whenever a gap is detected, and the subscription will be stale at that point also. The best way to detect whether a particular topic is stale however is to implement the relevant subscription callbacks and you will be automatically notified.

Generally you do not have to do anything to recover from stale subscriptions, as OpenMAMA will attempt to recover automatically, though you may have application specific code that you wish to invoke e.g. some warning propagated to the user. Also note that the concept of a gap and staleness is only for "market data" subscriptions, not "basic" subscriptions. 

The OpenMAMA Developer's Guide, p67-70, gives a good overview of the data quality state machine. 

Glenn 

From: Nicolas Huyghe <Nicolas.Huyghe@...>
Date: Fri, 14 Sep 2012 05:49:31 -0500
To: "openmama-users@..." <openmama-users@...>
Subject: [Openmama-users] Handling stale messages

Hi there,

 

When looking at source code, I see two ways of notifying subscription staleness:  mamaStatus: MAMA_MSG_STATUS_STALE and mamaQuality: MAMA_QUALITY_STALE

 

What is the difference between the two and should both be handled?

 

Thanks

 

-Nicolas

_______________________________________________ Openmama-users mailing list Openmama-users@... https://lists.openmama.org/mailman/listinfo/openmama-users



Please consider the environment before printing this e-mail.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error, please advise the sender immediately by reply e-mail and delete this message and any attachments without retaining a copy.

Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.


Handling stale messages

Nicolas Huyghe
 

Hi there,

 

When looking at source code, I see two ways of notifying subscription staleness:  mamaStatus: MAMA_MSG_STATUS_STALE and mamaQuality: MAMA_QUALITY_STALE

 

What is the difference between the two and should both be handled?

 

Thanks

 

-Nicolas


Re: create new bridge

Glenn McClements <gmcclements@...>
 

Hi Nicolas,
There is a wiki page at http://wiki.openmama.org/index.php/OpenMAMA_Bridge_Documentation which give a good introduction to building your own bridge. 

You can also take a look at the sample Avis bridge and there is a development mailing list for questions:
http://lists.openmama.org/mailman/listinfo/openmama-dev

Glenn  

From: Nicolas Huyghe <Nicolas.Huyghe@...>
Date: Wed, 12 Sep 2012 05:18:36 -0500
To: "openmama-users@..." <openmama-users@...>
Subject: [Openmama-users] create new bridge

Hello

 

Is there a document that explains how to create a new bridge?

 

Thanks

_______________________________________________ Openmama-users mailing list Openmama-users@... https://lists.openmama.org/mailman/listinfo/openmama-users



Please consider the environment before printing this e-mail.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error, please advise the sender immediately by reply e-mail and delete this message and any attachments without retaining a copy.

Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.


create new bridge

Nicolas Huyghe
 

Hello

 

Is there a document that explains how to create a new bridge?

 

Thanks


Protobuf Payload Addendum

Tim Jones <Tgjones@...>
 

Hi,

 

As I am a NYSE Technologies employee, I have been asked to clarify a few points regarding the Protocol Buffers Payload for OpenMAMA library.

 

Firstly, the Protocol Buffers for OpenMAMA library is a home project, and is not, at this stage, affiliated or endorsed by NYSE Technologies or NYSE Euronext. It is entirely, independent, open-source, and is not provided with a warranty of any kind.

 

Secondly, in my license ignorance I posted that the library is distributed under the GPL. I was incorrect, it is distributed under the Lesser GPL, to match OpenMAMA. The license is viewable in the LICENSE file under the mama_protobuf repository.

 

Thanks

Tim




Please consider the environment before printing this e-mail.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error, please advise the sender immediately by reply e-mail and delete this message and any attachments without retaining a copy.

Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.


Protobuf Payload

Tim Jones <Tgjones@...>
 

Hi,

 

I've recently been working on an open-source demonstrator payload for OpenMAMA which wraps Google Protocol Buffers.

 

Firstly, its not complete! It builds but I have no facility to test it (and therefore debug it), as the only open-source middleware (that I know of), Avis, is not payload-agnostic.

 

It is distributed under the GPL and is available at https://github.com/tgjonesuk/mama_protobuf. Please feel free to clone, fork or whatever. If you make any progress, please let me know and I'll add you as a GitHub collaborator or commit the changes myself.

 

Thanks

Tim

 

Tim Jones

tgjones@...

 

 




Please consider the environment before printing this e-mail.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error, please advise the sender immediately by reply e-mail and delete this message and any attachments without retaining a copy.

Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.


Re: Publishing own dictionary

Jacobraj Benet <JBenet@...>
 

Hi Nicolas,

We don't have any sample example program for populating/publishing dictionary, but those method should work out of box with no issues, as it has been used internally in other products.

Thanks,

-- 

Jacob


From: Nicolas Huyghe <Nicolas.Huyghe@...>
Date: Thursday, August 30, 2012 4:47 AM
To: "openmama-users@..." <openmama-users@...>
Subject: [Openmama-users] Publishing own dictionary

Hi there

 

I’d like to publish the dictionary, which is possible as specified in “Advanced Publishing” section of the dev guide.

I also noticed that there is a way to populate a dictionary from file, but could not find any sample file.

 

Is there sample code available for publishing the dictionary? Does anyone has a sample dictionary I could use to populate the dictionary to be published from a file?

 

Many thanks

 

-Nicolas


Please consider the environment before printing this email.

Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.


Re: MAMA API not enforcing entitlement checks message

Jacobraj Benet <JBenet@...>
 

Hi Nicolas,

Good to hear that the example program was fine.

By default the OpenMAMA API does not enforce entitlement but can be enabled through the mama.properties to enforce entitlements.

For the entitlement to work, you would need to have the entitlement server, where user are authenticated to particular markets and where the reports are generated.

OEA is Entitlement API that mama uses internally to enforce entitlement.

Thanks,

-- 

Jacob


From: Nicolas Huyghe <Nicolas.Huyghe@...>
Date: Thursday, August 30, 2012 3:40 AM
To: Jacobraj Benet <jbenet@...>, "openmama-users@..." <openmama-users@...>
Subject: RE: [Openmama-users] MAMA API not enforcing entitlement checks message

Hi Jacob,

 

The publisher / subscriber samples work fine (as well as the JNI samples).

I need to understand how entitlements are working when using OpenMAMA.

Is the entitlement server proprietary (as well as the entitlement client code which is disabled by default when compiling OpenMAMA)?.

Can you tell me what OEA entitlement stand for in the dev guide?

 

Thanks

 

-Nicolas

 

From: Jacobraj Benet [mailto:JBenet@...]
Sent: Wednesday, August 29, 2012 4:37 PM
To: Nicolas Huyghe; openmama-users@...
Subject: Re: [Openmama-users] MAMA API not enforcing entitlement checks message

 

Hi Nicolas,

 

The below message is only a warning message that informs that application is not enforcing entitlement.

 

This is not of any concern, How are you running the example program? Can you run the same application with –v –v –v –v and send us the error output.

 

Thanks,

-- 

Jacob

 

From: Nicolas Huyghe <Nicolas.Huyghe@...>
Date: Wednesday, August 29, 2012 11:01 AM
To: "openmama-users@..." <openmama-users@...>
Subject: [Openmama-users] MAMA API not enforcing entitlement checks message

 

Hi,

 

I am new to Open MAMA and have the message below when starting a sample subscriber.

 

********************************************************************************

Note: This build of the MAMA API is not enforcing entitlement checks.

Please see the Licensing file for details

**********************************************************************************

 

Does anybody know where this “licensing file” is or what this message is about?


Thanks

 

Nicolas


Please consider the environment before printing this email.

Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.


Please consider the environment before printing this email.

Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.


Publishing own dictionary

Nicolas Huyghe
 

Hi there

 

I’d like to publish the dictionary, which is possible as specified in “Advanced Publishing” section of the dev guide.

I also noticed that there is a way to populate a dictionary from file, but could not find any sample file.

 

Is there sample code available for publishing the dictionary? Does anyone has a sample dictionary I could use to populate the dictionary to be published from a file?

 

Many thanks

 

-Nicolas


Re: MAMA API not enforcing entitlement checks message

Nicolas Huyghe
 

Hi Jacob,

 

The publisher / subscriber samples work fine (as well as the JNI samples).

I need to understand how entitlements are working when using OpenMAMA.

Is the entitlement server proprietary (as well as the entitlement client code which is disabled by default when compiling OpenMAMA)?.

Can you tell me what OEA entitlement stand for in the dev guide?

 

Thanks

 

-Nicolas

 

From: Jacobraj Benet [mailto:JBenet@...]
Sent: Wednesday, August 29, 2012 4:37 PM
To: Nicolas Huyghe; openmama-users@...
Subject: Re: [Openmama-users] MAMA API not enforcing entitlement checks message

 

Hi Nicolas,

 

The below message is only a warning message that informs that application is not enforcing entitlement.

 

This is not of any concern, How are you running the example program? Can you run the same application with –v –v –v –v and send us the error output.

 

Thanks,

-- 

Jacob

 

From: Nicolas Huyghe <Nicolas.Huyghe@...>
Date: Wednesday, August 29, 2012 11:01 AM
To: "openmama-users@..." <openmama-users@...>
Subject: [Openmama-users] MAMA API not enforcing entitlement checks message

 

Hi,

 

I am new to Open MAMA and have the message below when starting a sample subscriber.

 

********************************************************************************

Note: This build of the MAMA API is not enforcing entitlement checks.

Please see the Licensing file for details

**********************************************************************************

 

Does anybody know where this “licensing file” is or what this message is about?


Thanks

 

Nicolas


Please consider the environment before printing this email.

Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.


Re: installing openmama on ubuntu 12

Jacobraj Benet <JBenet@...>
 

Hi John,

I don't have lot of experience setting up the Virtual machine and so I can't provide much guidance on the version of Virtual Machine to use for the training.

In the past, we have use linux laptop without the Virtual machine and we were able to build, compile and run MAMA application with no issues on many flavors of Linux. 

Just for clarification purpose, Why are you using Virtual machine if we are going to provide laptop for every individual. Why not just provide them linux installed laptop? Just a thought.

Thanks,

-- 

Jacob


From: John Gray <john.gray@...>
Date: Wednesday, August 29, 2012 3:17 PM
To: Jacobraj Benet <jbenet@...>, "openmama-users@..." <openmama-users@...>
Cc: Brian Fitzpatrick <brian.fitzpatrick@...>, Jamie Hill <JHill@...>
Subject: RE: [Openmama-users] installing openmama on ubuntu 12

(Adding Jamie)

 

Hi Jacob

 

I have a working version on Ubuntu 10.04 64bit – but this is unsuitable for training as there was a lot of problems that were never quite resolved getting the VM setup for the dry run.  I was aiming for a 32bit version of VMDK in 2GB max file size (VBOX and VMWare compatible) as the lowest common denominator – never quite sure what there will be available on client training sites.

 

Im open to any other suggestions around this issue and how we can have a very portable system that will easily work with the majority of expected hardware arrangements.

 

The environment build is talking the vast majority of the prep time – the other tasks are largely about getting a bit more orgainsed with exercises etc.  I will need some input from NYSE with the building of this.

 

Thanks

John

 

 

 

From: Jacobraj Benet [mailto:JBenet@...]
Sent: 28 August 2012 22:33
To: John Gray; openmama-users@...
Cc: Brian Fitzpatrick
Subject: Re: [Openmama-users] installing openmama on ubuntu 12

 

Hi John,

 

Are you having this issue only on ubuntu 12 or also in earlier version of Ubuntu? I know in the past you were able to build and run mama on Ubuntu, What is very different with this build?

 

Is the build issue only on 64 bit? Or also on the 32 bit?

 

Thanks,

-- 

Jacob

 

From: John Gray <john.gray@...>
Date: Tuesday, August 28, 2012 3:25 PM
To: Jacobraj Benet <jbenet@...>, "openmama-users@..." <openmama-users@...>
Cc: Brian Fitzpatrick <brian.fitzpatrick@...>
Subject: RE: [Openmama-users] installing openmama on ubuntu 12

 

Hi

 

I did a complete folder rm –rf OpenMama2.1 and re-extracted the files.

 

I’ve made sure the pthread is installed and the LD_LIBRARY_PATH is set but still getting the same 3 errors:

 

·         Warning about not using WombatCommon in configuration output (/opt/openmama/include/wombat/machine.h  not useable and not present)

·         Undefined pthread references (as before)

·         File in wrong format (as before)

 

I have also tried the latest downloads version 2.1.1.2 but for the same configure command line I get a series of “No such file or directory”  errors:

Line 58, 63,68,73

 

Any further thoughts?

 

j

 

 

 

From: Jacobraj Benet [mailto:JBenet@...]
Sent: 28 August 2012 20:30
To: John Gray; openmama-users@...
Cc: Brian Fitzpatrick
Subject: Re: [Openmama-users] installing openmama on ubuntu 12

 

Hi John,

 

Can you try to do a clean build of the MAMA API making sure that the pthread is installed and the location of the installed folder is in the LD_LIBRARY_PATH

 

If it still complaining about pthread, then can you try it on some other machine to rule out any architectural issues. I am unable to advice clearly as this is machine specific library error, but it seems like either pthread is not installed properly or the location of the pthread in not included in the Lib folder.

 

Thanks,

-- 

Jacob

 

From: John Gray <john.gray@...>
Date: Tuesday, August 28, 2012 2:11 PM
To: Jacobraj Benet <jbenet@...>, "openmama-users@..." <openmama-users@...>
Cc: Brian Fitzpatrick <brian.fitzpatrick@...>
Subject: FW: [Openmama-users] installing openmama on ubuntu 12

 

Hi Jacob,

 

Im still stuck with these errors – can you give some advice?

 

Thanks

j

 

From: John Gray
Sent: 27 August 2012 21:36
To: 'Jacobraj Benet'; openmama-users@...
Subject: RE: [Openmama-users] installing openmama on ubuntu 12

 

Hi Jacob  -still getting stuck

 

Did an install for pthread – then noticed that configuration was warning that there was no ncurses – so installed this also.

 

Now configuration giving warning:

 

Checking /opt/openmama/include/wombat/machine.h usability…no

Checking /opt/openmama/include/wombat/machine.h presence…no

Checking for /opt/openmama/include/wombat/machine.h …no

Configure: WARNING: Not using WombatCommon API

 

The only thing in /opt/ folder is the Oracle VBOX guest additions.

 

Still getting the undefined references below for the pthread funcs.

 

NOTE: this is  version 2.1  - not the latest download.

 

Thanks

j

 

 

 

From: Jacobraj Benet [mailto:JBenet@...]
Sent: 27 August 2012 20:42
To: John Gray; openmama-users@...
Subject: Re: [Openmama-users] installing openmama on ubuntu 12

 

Hi John,

 

It looks like your missing the pthread library, Can you make sure that you have the pthread library installed in your machine.

 

Thanks,

Jacob

-- 

Jacob

 

From: John Gray <john.gray@...>
Date: Monday, August 27, 2012 2:23 PM
To: "openmama-users@..." <openmama-users@...>
Subject: [Openmama-users] installing openmama on ubuntu 12

 

I have installed openmama on Ubuntu 12 (32bit)  but having trouble building it  - getting the following error:

 

Googling seems to indicate a problem  with Boost or pthreads.   Any advice?

 

Thanks

John

 

/bin/bash ../../../libtool --tag=CXX   --mode=link g++  -g -O2  -L/usr/local/lib -L./../../cpp -L./../../c -L./../../../../../common/c_cpp/src/c -o mamalistencpp mamalistencpp.o -lmamacpp -lmama -lpthread -ldl -lnsl

libtool: link: g++ -g -O2 -o .libs/mamalistencpp mamalistencpp.o  -L/usr/local/lib -L./../../cpp -L./../../c -L./../../../../../common/c_cpp/src/c /home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/cpp/.libs/libmamacpp.so -L./../c /home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so -L./../../../../common/c_cpp/src/c -lrt -luuid -lpthread -ldl -lnsl -Wl,-rpath -Wl,/home/openmama/openmama/OpenMAMA-2.1/lib

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `sem_init'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `pthread_mutexattr_settype'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `pthread_key_create'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `sem_destroy'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `pthread_getspecific'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `sem_timedwait'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `pthread_create'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `pthread_mutexattr_init'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `pthread_key_delete'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `sem_post'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `sem_trywait'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `sem_getvalue'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `pthread_setspecific'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `sem_wait'

/home/openmama/openmama/OpenMAMA-2.1/mama/c_cpp/src/c/.libs/libmama.so: undefined reference to `pthread_join'


Please consider the environment before printing this email.

Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.


Please consider the environment before printing this email.

Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.


Please consider the environment before printing this email.

Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.


Please consider the environment before printing this email.

Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.


Re: MAMA API not enforcing entitlement checks message

Jacobraj Benet <JBenet@...>
 

Hi Nicolas,

The below message is only a warning message that informs that application is not enforcing entitlement.

This is not of any concern, How are you running the example program? Can you run the same application with –v –v –v –v and send us the error output.

Thanks,

-- 

Jacob


From: Nicolas Huyghe <Nicolas.Huyghe@...>
Date: Wednesday, August 29, 2012 11:01 AM
To: "openmama-users@..." <openmama-users@...>
Subject: [Openmama-users] MAMA API not enforcing entitlement checks message

Hi,

 

I am new to Open MAMA and have the message below when starting a sample subscriber.

 

********************************************************************************

Note: This build of the MAMA API is not enforcing entitlement checks.

Please see the Licensing file for details

**********************************************************************************

 

Does anybody know where this “licensing file” is or what this message is about?


Thanks

 

Nicolas


Please consider the environment before printing this email.

Visit our website at http://www.nyse.com
*****************************************************************************
Note: The information contained in this message and any attachment to it is privileged, confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to the message, and please delete it from your system. Thank you. NYSE Euronext.